User's Manual

(A).6s later,LED indicator flash 1-time;

loose press learning button,press any button of the remote,then choose jog mode;

(B).8s later,LED indicator flash 2-time;

loose press learning button,press any button of the remote,then choose self-lock mode;

(C ).10s later,LED indicator flash 3-time;

loose press learning button,press any button of the remote,then choose interlock mode;

After programme the work mode(jog/self-lock/interlock),then the 4 button of the remote is

programmed with respective function automatically.

After programme the 1

remote,then programme the other remote as follow:

(A).Press the learning button,LED indicator will be on,the loose press;

(B).Press any button of the remote,LED indicator will flash,that means programme

is finished.

This receiver can decode 16pcs remote with different code in max,while remote with same

code,the receiver can decode limitless remote.

Before programming,,please connect 50ohm 1/4 wave length antenna,make sure the antenna

is straight for optimal decoding. Wave length=light velocity/frequency.

5.Application:

This receiver is normally used at boom barrier,parking system,sliding gate/door,garage

door,auto-door,other automation door system,required high-stability and high anti-interference

for AC or DC remote controlling.

6.Parts:our company matched remote.

7.Notice:

(1).VCC voltage must be same as receiver,and doing EMC filtering;

(2).50ohm 1/4 wave length antenna is better for decoding;

(4).For 433MHz frequency,antenna should be 17cm length;

(5).Keep antenna straight,and aways from signal jammer,high voltage device,and other

interference device;

(6).The receiver must be compatible with the transmitter(remote),such as frequency,decoding

mode.