User's Manual

ManualsBrandsShanghai Smarfid Security Equipment ManualsElectronics433MHz Remote Module

User Manual Of REM3040

(433MHz Remote Module)

Model No.: REM3040

Product Name: 433MHz Remote Module

1.Parameter:

Work Voltage:DC5V

Frequency:433MHz optional

Decoding:Learning Code,Rolling Code.

Static Currency:6mA

Signal Output:4.5V High Level Output.

Modulation Mode: ASK,OOK.

Work Mode:Jog(inching),Self-lock,Interlock.

Sensitivity:-110db.

Size:34*20*5.3mm.

Weight:6g.

2.Feature:

REM3040 is a super-heterodyne receiver with high sensitivity,adopting latest high-technical RF

IC,with stable,qualified decoding character,against high-level interference in seriously working

Summary of content (4 pages)

PAGE 1
User Manual Of REM3040 (433MHz Remote Module) Model No.: REM3040 Product Name: 433MHz Remote Module 1.Parameter: Work Voltage:DC5V Frequency:433MHz optional Decoding:Learning Code,Rolling Code. Static Currency:6mA Signal Output:4.5V High Level Output. Modulation Mode: ASK,OOK. Work Mode:Jog(inching),Self-lock,Interlock. Sensitivity:-110db. Size:34*20*5.3mm. Weight:6g. 2.
PAGE 2
environment in site,working for long distance together with its programmed remote.At present,this model is the best choice in the field of super-heterodyne receiver. It can decode fix code, learning code and rolling code,such as 2262\2264\2260,301,etc. The user can progamme the work mode by theirself to choose jog(inching) or self-lock or interlock. 3.
PAGE 3
(A).6s later,LED indicator flash 1-time; loose press learning button,press any button of the remote,then choose jog mode; (B).8s later,LED indicator flash 2-time; loose press learning button,press any button of the remote,then choose self-lock mode; (C ).
PAGE 4
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.