User's Manual

Specification:
Model
Functions
ICED2-i ICED2-s
Functional Specification
Request to Exit indication
Color changes from Blue to Green with a beep
Dry Contact Input
For Door Unlock (NC/NO can be defined by SW only)
Local Alarm
LED flashing in RED & Siren turn ON
Tamper Alarm
Local Siren will be triggered when the cover is removed
Fire Alarm Input
Trigger Siren & Alarm output Trigger Siren, Alarm output & Door unlock
Definable Alarm Output
NC/COM/NO 30Vdc @ 1A (max) (dry contact)
Buzzer
Can use SW to turn ON or OFF for REX activation and DHO only
Indicator(s)
Door Help Open, Fire Alarm, Mains failure
“Break Glass”
emergency function
N/A Hit hard at the center of the cover
Remote Button (Optional)
433MHz
(Max supports 5 remote buttons at the same time.)
Function Cards
Add/Delete/Clear
Card Capacity
2,000 card number (expandable)
Audit Record
20,000 events
Reader Connection
Wiegand / Support IN/OUT readers Configuration (Optional)
Typical Read range
~3 to 4cm
Maximum Controllers in one loop
64 Controllers (ICED)
Dimension
118.2 (L) X 74.2 (W) X 8.5 (H) mm (above surface)
Electric Lock bypass relay
30Vdc with 2A (max)
(s version)
Weight
184g
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.