User's Manual







 CardReading
 FPreaderabletoseteitherof4typesofaccessmode.TheyareCardonly；Card+FP； FP
only；CardorFP.
 CardOnly:Presentcardtogetcarddata>outputcarddatatocontroller
 Card+FP：Presentcardtogetcarddata>co
mparethecarddataandthedatawhich
store inside the FP reader and find out the corresponding user ID > scan FP and
comparethecorrespondingFPtemplate>Ifsuccess,outputcarddatatocontroller
 FP only：FP scanner wi ll always get ready to scan. Scan FP and co
mpare all FP
template which store inside device > If success, get the corresponding user ID and
data>outputcarddatatocontroller
 CardorFP：Pleasereferto“CardOnly”and“FPOnly”










Cardonly Readcardsuccess
Orange LED light up，buzzer
longbeepon
ce（100ms）；Blue
backlitlightupfor5s.
Outputcarddata
FPonly WaitingforFPscanning NoLEDlightupnormally.When
user put finger on the scanner,
FPScannerblueLEDlightup
CompareFPsuccess
Orange LED light up，buzzer
longbeeponce（100ms）；Blue
backlitlightupfor5s.
Outputcarddata
CompareFPfail Buzzer short beep twice
（50ms/time）
CardorFP WaitingforFPscanning NoLEDlightupnormally.When
user put finger on the scanner,
FPScannerblueLEDlightup
Read card success or Compare FP
success
Orange LED light up，buzzer
longbeeponce（100ms）；Blue
backlitlightupfor5s。
Outputcarddata
CompareFPfail Buzzer short beep twice