User's Manual

Smart Machine Smart Decision

Document Title

SIM7100A_User Manual_V1.01

Version

1.01

Date

2014-12-11

Status

Draft

Document Control ID

SIM7100A_User Manual_V1.01

General Notes

SIMCom offers this information as a service to its customers, to support application and engineering

efforts that use the products designed by SIMCom. The information provided is based upon requirements

specifically provided to SIMCom by the customers. SIMCom has not undertaken any independent search

for additional relevant information, including any information that may be in the customer’s possession.

Furthermore, system validation of this product designed by SIMCom within a larger electronic system

remains the responsibility of the customer or the customer’s system integrator. All specifications supplied

herein are subject to change.

This document contains proprietary technical information which is the property of SIMCom Limited,

copying of this document and giving it to others and the using or communication of the contents thereof,

are forbidden without express authority. Offenders are liable to the payment of damages. All rights

reserved in the event of grant of a patent or the registration of a utility model or design. All specification

supplied herein are subject to change without notice at any time.

FCC Caution

(1)Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance

with provided instructions and the antenna(s) used for this transmitter must be installed to provide a

separation distance of at least 20 cm from all persons and must not be collocated or operating in

conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna

installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

(2) Any changes or modifications not expressly approved by the grantee of this device could void the

user's authority to operate the equipment.

(3) This Transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

(4) Changes or modifications to this unit not expressly approved by the party responsible for compliance

could void the user authority to operate the equipment.

(5) the modules FCC ID is not visible when installed in the host, or

(6) if the host is marketed so that end users do not have straight forward commonly used methods for

access to remove the module so that the FCC ID of the module is visible; then an additional permanent

label referring to the enclosed module: Contains Transmitter Module FCC ID: UDV-SIM7100A or

Contains FCC ID: UDV-SIM7100A must be used.