User's Manual

Smart Machine Smart Decision
SIM7100A_User Manual_V1.01 2014-12-11
13
SMS
● MT, MO, CB, Text and PDU mode
● SMS storage: USIM card or ME(default)
● Support transmission of SMS alternatively over CSD or GPRS.
User can choose preferred mode.
USIM interface Support identity card: 1.8V, 3V.
USIM application toolkit
Support SAT class 3, GSM 11.14 Release 98
Support USAT
Phonebook management Support phonebook types: SM, FD, LD, RC, ON, MC.
Audio features
Support digital audio interface: PCM interface.
● Used for analog audio function with external codec.
● Support long frame sync and short frame sync.
● Support 8-bit A-law, μ-law and 16-bit linear data formats.
● Support master and slave mode, but must be the master in long
frame sync.
UART interface
 Default one Full modem serial port
 1200bps to 460800bps.
 Can be used for AT commands or data stream.
 Support RTS/CTS hardware handshake and software ON/OFF
flow control.
 Multiplex ability according to GSM 07.10 Multiplexer Protocol.
 Autobauding supports baud rate from 1200 bps to 115200bps.
 upgrading firmware
MMC/SD/SDIO
● Two secure digital controller (SDC) ports up to 52MHz:
● support MMC and SD cards with 1.8 V or 2.95 V on SD1
● support SDIO with1.8 V only on SD2
USB USB 2.0 specification-compliant as a peripheral or embedded host
Firmware upgrade Firmware upgrade over USB interface
Physical characteristics
Size:30*30*2.9mm
Weight:5.7 g
Temperature range
● Normal operation temperature: -30°C to +80°C
● Extended operation temperature: -40°C to +85°C
● Storage temperature -45°C to +90°C
Table 3: Coding schemes and maximum net data rates over air interface
HSDPA device category
Max data rate（peak）
Modulation type
Category 1 1.2Mbps 16QAM,QPSK
Category 2 1.2Mbps 16QAM,QPSK
Category 3 1.8Mbps 16QAM,QPSK
Category 4 1.8Mbps 16QAM,QPSK
Category 5 3.6Mbps 16QAM,QPSK
Category 6 3.6Mbps 16QAM,QPSK
Category 7 7.2Mbps 16QAM,QPSK