User's Manual

Smart Machine Smart Decision
SIM5360A_User_Manual_V1.03 2014-07-03
53
data which is between 0 and 32768. The data can be transformed to any type such as voltage, temperature
etc. Please refer to document [1].
Note: The input signal voltage value in ADC must not be higher than 2.2V.
3.13.4 LDO
SIM5360A has a LDO power output, namely VDD_EXT. The LDO is available and output voltage is
2.85v by default, rated for 300mA. User can switch the LDO on or off by the AT command
“AT+CVAUXS” and configure its output voltage by the AT command “AT+CVAUXV”.
Table 30: Electronic characteristic
Symbol Description Min Typ Max Unit
VDD_EXT Output voltage 1.5 2.85 3.05 V
I
O
Output current - - 300 mA