User's Guide

Smart Machine Smart Decision
SIM5360A EVB User Guide 03.18.2014
22
(5) If user use UART to USB cable, user need to connect the cable to module serial port and the
USB port of the computer, then follow step 1~3.
6.4 Downloading
Connect the USB port line to the USB port, connect the direct current source adapter, run the
download program, and choose the correct image, please follow the QDL downloading menu for
the operation. Update procedure is described in the figure below.
Figure 17: USB interface update procedure
6.5 Turning off
Press the POWER_ON for about 1 second, SIM5360 module will be turned off.
NOTE: If user uses USB to power on the module, just disconnect the USB cable to turn off.
START
Module power on
Connect module USB slot and PC by USB cable
Install module driver on windows OS.
Close all app software which
use USB virtual
p
orts
Double click QDL.exe,
u
p
date be
g
in
Waiting until download finish,
QDL quit out automatically
Update success
Copy new firmware into QDL data folder