User's Manual

SIM908 Document
- 6 -
VDD-EXT 44 O 2.8V output power supply If it is unused, keep open.
GPS-VANT-OUT 75 O 2.8V output for GPS active antenna If it is unused, keep open.
GPS-VANT-IN 76 I GPS active antenna power supply If it is unused, keep open.
GND
1, 2, 5, 10, 14, 37,
40, 41, 43, 57, 58,
60, 61, 64, 65, 77,
78, 80
Ground
Charge interface
VCHG 74 I Charger input
TEMP_BAT 73 I Battery temperature sensor
Power on/down
PWRKEY 3 I
PWRKEY should be pulled low at
least 1 second and then released to
power on/down the module.
Pulled up internally.
Audio interfaces
MIC1P 23
MIC1N 24
I Differential audio input
SPK1P 22
SPK1N 21
O Differential audio output
MIC2P 27
MIC2N 28
I Differential audio input
SPK2N 25
SPK2P 26
O Differential audio output
If these pins are unused,
keep open.
Status
STATUS 52 O Power on status
NETLIGHT 51 O Network status
If these pins are unused,
keep open.
LCD interface
DISP -CLK 6 O
DISP-DATA 7 I/O
DISP -D/C 8 O
DISP -CS 9 O
Display interface
If these pins are unused,
keep open.
I
2
C interface
I2C-SDA 56 O
I
2
C serial bus data
I2C-SCL 55 I/O
I
2
C serial bus clock
If these pins are unused,
keep open.
Keypad interface / GPIOs
GPIO1/KBR0 31 GPIO1/keypad row 0
GPIO2/KBR1 32 GPIO2/keypad row 1
GPIO3/KBR2 33
I/O
GPIO3/keypad row 2
If these pins are unused,
keep open.