User's Manual

Smart Machine Smart Decision
SIM5320AD EVB User Guide 02.04.2011
19
Figure 13: USB interface update procedure
6.5 Turning off
Press the POWER_ON for about 1 second, SIM5320AD module will be turned off.
NOTE: If user uses USB to power on the module, just disconnect the USB cable to turn off.
6.6 Measuring the current consumption
User can measure SIM5320AD current consumption in the sleep mode on our EVB. User need to
follow steps.
(1) Remove the jumper from J202, and provide a 3.8V DC power supply (such as: Agilent 66319B)
for VBAT on SIM5320AD EVB;
(2) Install a SIM card and a RF antenna;
(3) Shutdown UART by S204;
(4) Remove the USB cable;
(5) Power on SIM5320AD;
SIM5320AD will enter sleep mode automatically. User can
measure SIM5320AD current
consumption. Test report is described in the figure below.
START
Module power on
Connect module USB slot and PC by USB cable
Install module driver on windows OS.
Close all app software which
use USB virtual
p
orts
Double click QDL.exe,
u
p
date be
g
in
Waiting until download finish,
QDL quit out automatically
Update success
Copy new firmware into QDL data folder