User's Manual

Smart Machine Smart Decision

SIM5320A_Hardware Design_V1.01 2011-2-29

Radiofrequency radiation exposure Information:

The module does not contain antenna. It has an antenna PIN. The module is to be used in mobile

or fixed applications only. For other antenna(s) selection, the antenna gain including cable loss must

not exceed 7.2 dBi in the 850 MHz Cellular band and 3.5 dBi in the PCS 1900 MHz band, for the purpose

of satisfying the requirements of FCC 2.1043 and 2.1091. The antenna used for this module must be

installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located

or operating in conjunction with other antennas or transmitters within a host device, except in accordance

with FCC multi-transmitter product procedures. Compliance of this module in all final product

configurations is the responsibility of the Grantee. OEM integrators must be provided with specific

information required to satisfy RF exposure compliance for all final host devices and installations. OEM

integrators can replace the antenna by themselves. They should comply with Consideration for antenna

selection and Consideration for antenna installation.

This document contains proprietary technical information which is the property of SIMCom Limited,

copying of this document and giving it to others and the using or communication of the contents thereof,

are forbidden without express authority. Offenders are liable to the payment of damages. All rights

reserved in the event of grant of a patent or the registration of a utility model or design. All specification

supplied herein are subject to change without notice at any time.