Installation Instructions

SIM5216A _HD_V1.02 Hardware Design
SIM5216A _HD_V1.02 26.08.2010
71
18 CAM_D8 NC 53 CAM_D5 NC
19 CAM_HSYNC NC 52 CAM_D7 NC
20 GND GND 51 CAM_D9 NC
21 CAM_CLK NC 50 CAM_VSYNC NC
22 CAM_STANDBY NC 49 CAM_PCLK NC
23 SPK_P NC 48 CAM_RESET NC
24 SPK_N NC 47 IIC_SDA NC(See Note)
25 EAR_P NC 46 IIC_SCL NC(See Note)
26 EAR_N NC 45 POWER_ON NC
27 HPR NC 44 MIC_N 0.1u cap to ground
28 HPL NC 43 MIC_P 0.1u cap to ground
29 RESET NC 42 HP_MICP NC
30 GPIO2 NC 41 HKADC NC
31 GPIO3 NC 40 VREG_AUX NC
32 GPIO4 NC 39 SD_DATA3 NC
33 GPIO5 NC 38 SD_DATA2 NC
34 SD_CLK NC 37 SD_DATA1 NC
35 SD_CMD NC 36 SD_DATA0 NC
Note: UART_RXD has been pulled down with a 15kR resistor to ground in module.
USIM DATA has been pulled up with a 22kR resistor to V_USIM in module.
IIC_SDA and IIC_SCL have been pulled up with two 2.2kR resistors to 2.6V in module. So
there is no need to pull them up or down in your application circuit.
Contact us:
Shanghai SIMCOM Wireless Solutions Ltd.
Add: SIM Technology Building，No.633，Jinzhong Road，Changning District，
Shanghai P.R. China 200335
Tel: [phone]
Fax: [phone]
URL: www.sim.com/wm