User's Manual
Nearby the electronic equipment controlled by high precision, please turn off the phone,
otherwise, cause electronic equipment failure. The equipment may be affected by the
phone, including hearing aid, pacemaker, fire-alarm, automatic gate and other automatic
control equipments. Users who use medical auxiliary equipment should contact with the
equipment service and confirm the effect of radio wave on the equipment.
Medical place
Please follow the following notes in the medical place
z Please do not install and use the phone in the operation room, intensive
care unit (ICU) or coronary care unit (CCU).
z Please turn off the phone, nearby the area in use of medical equipment.
z In the medical place where the phone is prohibiting using, please follow the
instruction and regulation.
z Please note the ringer, volume and vibration setting, so as not to affect the patients
with heart disease.
Combustible and explosive area
In inflammable and explosive area, please do not use or charge the phone to
avoid causing explosion or fire. Inflammable and explosive area as following:
z Gas station
z Fuel area (such as: the cabin under the deck of the ship)
FCC Statement
RF exposure information:
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This
device types 911 (Contain FCC ID: UDV-0606020060002) has been tested against
this SAR limit. The highest SAR value reported under this standard during product
certification when properly worn on the body is 0.889 W/kg.
Tests for SAR are conducted using standard operating positions specified by the FCC
with the device transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the actual
SAR level of the device while operation can be well below the maximum value. This is
because the device is designed to operate at multiple power levels so as to use only
the power required to reach the network. In general, the closer you are to a wireless
base station antenna, the lower the power output. Before a device model is available
3