User's Manual

Table Of Contents

User manual

1. Disconnect the cigar connector to car, then chose the location you want to install and clear it

completely.

2. Then remove the protect tape of the LED strip, fix it to the clears location.

3, put in the cigar connector to the cigarette lighter, then open the APP according to the menu to

process it.

PAGE 1
User manual 1. Disconnect the cigar connector to car, then chose the location you want to install and clear it completely. 2. Then remove the protect tape of the LED strip, fix it to the clears location. 3, put in the cigar connector to the cigarette lighter, then open the APP according to the menu to process it.
PAGE 2
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.