User's Manual
Table Of Contents
- 1. Introduction
- 2. Technical Parameter
- 3. Outside View and Packaging
- 4.Function Interface
- 4.1 Power Input
- 4.2 Keyboard
- 4.3 LCD & Touch Panel
- 4.4 IC Card
- 4.5 SAM Card
- 4.6 Magnetic Card
- 4.7 Buzzer
- 4.8 Serial Port
- 4.9 USB
- 4.10 T-Flash
- 4.11 Indicator
- 4.12 Printer
- 4.13 Battery
- 4.14 RTC
- 4.15 Power Switch
- 4.16 GPRS
- 5. Installation and adjustment
- 6. Repairs and maintenance
- 7. System components
- 8. Complete set
- 9. Safety precautions
- 10. SAR Info
4.9 USB
The USB port is at one side of the POS terminal near the serial port. This USB
Host 1.1 port supports U disk, USB keyboard and mouse, etc.
Attention: Maximum USB power supply is 500mA
4.10 T-Flash
T-Flash card slot is at one side of the pos terminal. It supports standard T-Flash
card.
4.11 Indicator
There are 4 lights at front of the TFT LCD, from right to left they are for power,
charge, RX, and TX.
Power Power indicator of the system, if
lights on means work of system.
Charge Charge indicator, if lights on
means adapter is inserted and
battery is being charged, lights
off means adaptor is not inserted
or charge finished that the
adapter can be pulled out.
RX GPG8 Communication receiving
indicator
TX GPG1 Communication sending
indicator
Table 4-2
9