User's Manual
Table Of Contents
- 1. Introduction
- 2. Technical Parameter
- 3. Outside View and Packaging
- 4.Function Interface
- 4.1 Power Input
- 4.2 Keyboard
- 4.3 LCD & Touch Panel
- 4.4 IC Card
- 4.5 SAM Card
- 4.6 Magnetic Card
- 4.7 Buzzer
- 4.8 Serial Port
- 4.9 USB
- 4.10 T-Flash
- 4.11 Indicator
- 4.12 Printer
- 4.13 Battery
- 4.14 RTC
- 4.15 Power Switch
- 4.16 GPRS
- 5. Installation and adjustment
- 6. Repairs and maintenance
- 7. System components
- 8. Complete set
- 9. Safety precautions
- 10. SAR Info
00 double ‘0’ keys
F1-F4 Multi-function key, normally for direction
or page up or down
Camera Photo and scanner
Table 4-1
The terminal will give out beep sound if the key press is effect. The keyboard
backlight also lights on and will light off 15 seconds after no key press is detected
(time can be defined).
Attention: Key pressing for long time will be treated as one time pressing event
not several times.
4.3 LCD & Touch Panel
PS4000 LCD is a 240×320 3.5' TFT screen with 24Bit RGB. The touch panel is
optional.
4.4 IC Card
IC card slot is below the keyboard of the pos terminal. Insert card to the slot with
the contact side upward.
4.5 SAM Card
There are 3 SAM cards under the battery at back of the PS4000 terminal.
SAM1,2,3 from the top down.
7