User's Manual
Table Of Contents
- 1. Introduction
- 2. Technical Parameter
- 3. Outside View and Packaging
- 4.Function Interface
- 4.1 Power Input
- 4.2 Keyboard
- 4.3 LCD & Touch Panel
- 4.4 IC Card
- 4.5 SAM Card
- 4.6 Magnetic Card
- 4.7 Buzzer
- 4.8 Serial Port
- 4.9 USB
- 4.10 T-Flash
- 4.11 Indicator
- 4.12 Printer
- 4.13 Battery
- 4.14 RTC
- 4.15 Power Switch
- 4.16 GPRS
- 5. Installation and adjustment
- 6. Repairs and maintenance
- 7. System components
- 8. Complete set
- 9. Safety precautions
- 10. SAR Info
Please recharge the battery with standard power adapter provided by SAND if it
is running down, When battery recharge, if the terminal is power on, the screen will
display charging indicator, if power off, the indicator in the screen will tell if charging
is finished. Power indicator lights means it is charging and lights out means charging
finished or no power adapter inserted.
4.14 RTC
Built-in RTC clock in PS4000, and furnished with proprietary battery which can
work for 2`3 years. Please set the time when first use.
4.15 Power Switch
The power switch is a red button locating in the side edge of the terminal.
Start up by pressing for short time and shut down by pressing for long time(2-3s)
only under abnormal situation. Normal shut down process should use the down
function of the system in case of data lost.
4.16 GPRS
SAM card
Picture 4-4
PS4000 GPRS is inbuilt in the cover in front of the terminal. The SIM card
locates in the side edge of the terminal, it will come out by pressing the yellow button
in the SIM card slot with pinpoint or other pointed object.
Attention: Do not replace the SIM card when power on.
11