User's Manual

To power up the chair, flip the main power switch

located on the back of the base of the chair to ON.

Ensure the electrical cord is connected to a 110V

grounded outlet and plugged into the power cord

port located on the back of the base of the chair.

Main Power Switch

Getting Comfortable

Chair Setup

To make the massage more intense, you can also remove the pillow pad or the pillow pad

and the pillow to remove cushioning between you and the massage mechanism in the seat

back.

Increase the Intensity of your Massage - Manually

Take a seat in the chair and take note of where the neck pillow

rests on your neck. Adjust the pillow so that it rests comfortably

in the arch of your neck. Do this by removing it from the velcro,

aligning it, and then reattaching to the velcro once it is in the

desired position.

Adjust Pillow

Neck Pillow

- When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled

and that the unit be placed in an environment free of dust and moisture.

- To avoid possible damage to product or injury to unsupervised children, always turn off power switch and

unplug massage chair from electrical outlet immediately after use.

CAUTION

Truefit

Body Scanning

Select any auto program. The chair will automatically begin scanning your body, mapping your

back, shoulders, and neck. During this process it is important to remain seated back into the

chair without lifting your head.

The scan can be viewed on the Tablet Remote screen. If fine tuning is needed just after your

body scan, wait for the shoulder adjust prompt to appear and then use the Back Adjustment

buttons to move the massage rollers up or down for the perfect shoulder kneading position.

Main Power

Switch

Power Cord Port