User's Manual

20
PRELIMINARY CHECKS
We recommend to place a piece of thin carpet or soft mat underneath
it to avoid damaging the floor.
Floor Protection
NAME AND FUNCTION OF EACH COMPONENTS
Massage chair
Floor
Carpet
9
Back Mechanism Massage Width: Press WIDTH from MANUAL display, press
RIGHT button then press UP or DOWN button to navigate among: Wide, Medium and
Narrow mechanism roller width. Press OK button to enter the setting you desire. Selected
width will show on the in-use screen. (Back Mechanism Massage Width can’t adjust when
under Kneading, Sync Manual mode)
Mechanism Massage Speed: Press Speed from MANUAL display, press RIGHT
button then press UP or DOWN button to navigate among: level 1, 2, 3, 4, 5, 6 Mechanism
massage speed.Press OK button to enter the speed level you desire. (Back Mechanism
Massage Speed can’t adjust when under Shiatsu, 3D Shiatsu Manual mode)
Foot Roller Speed: Press ROLLER from MANUAL display,press RIGHT
button then press UP or DOWN button to navigate among: foot roller speed level 1, 2, 3,
or OFF (deactivate foot roller). Press OK button to enter the speed level you desire.
Part-Air pressure region:
Press PART from AIRBAG display, press RIGHT button
then press UP or DOWN button to navigate among: Full, Arm & Shoulder, Back & Waist,
Leg & Foot, Buttock airbag positions. Press OK button to enter the airbag position you desire.
Force-Air pressure intensity: Press FORCE from AIRBAG display, press RIGHT
button then press UP or DOWN button to navigate among: level 1, 2, 3, 4, 5 airbag intensity,
or OFF (deactivate airbag intensity function), Press OK button to enter the airbag setting
you desire.
Air Pressure Massage Airbag
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This product is equipped with a cord having an equipment-grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded. Do not modify the plug provided
with the product – if it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
This product is for use on a nominal 120-V circuit and has a grounding plug that
looks like the plug illustrated in sketch A in following figure. Make sure that the product is
connected to an outlet having the same configuration as the plug. No adapter should be
used with this product.
Earthing
This massage chair belongs to LevelOne electrical appliance,make sure to use three-core
power supply socket and to guarantee the ground wire connected to the power supply socket
has obtained goodground connection to avoid electric leakage,electric shock and some
othernegative effect during use.