Massage Chair User Manual RT8713i
Thank you for purchasing this product. Please read this user manual carefully before using to ensure proper installation and operation. Please keep this USER MANUAL for further reference.
TECHNICAL SPECIFICATION Model Number Rated Voltage Rated Frequency Maximum User Weight Chair Weight : RT8713i : V : H : 300 LBS : 303.6 LBS SAFETY PRECAUTIONS Precautions listed below will help to ensure proper use of this appliance. The hazard that may cause by incorrect use are classified into “WARNING” and “ CAUTION”, please ensure that you read all instructions before using the massage chair. WARNING CAUTION Improper operation may cause severe personal injury or substantial property damage.
SAFETY PRECAUTIONS Best Circumstances Do not operate under blanket or pillow. Excessive heating can occur and cause fire,electric shock, or injury to persons. Do not use this appliance where temperature is over 40 C. Do not use this appliance in humid or dusty environment, or when any part of the body is in contact with plumbing or any similar ground. CAUTION Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like. TROUBLE SHOOTING No.
CARE AND MAINTENANCE Care and Maintenance Instructions To treat stains on back panel, armrest, footrest , plastic parts or air hose, spot clean with mild detergent foam,then wipe it with a dry cleaning cloth. To treat stains on controller, power box, spot clean with a dry cleaning cloth. To treat stains on back cushion or pillows, use a water-based upholstery cleaner only, wipe it with moist cloth, then air dry.
NAME AND FUNCTION OF EACH COMPONENT Remote Control PRELIMINARY CHECKS Inspections Before Sitting Use the remote control to recline the backrest to its lowest position, raise and extend the footrest to its top position, make sure there is enough clearance before commissioning. Return the backrest and footrest back to its default position and turn off the power switch. Ensure the footrest is well assembled before sitting on the massage chair.
NAME AND FUNCTION OF EACH COMPONENTS PRELIMINARY CHECKS Remote Control Instructions Move Methods Turn off the power switch and unplug the appliance from the electrical outlet. Using two people, push down on the backrest and lift up on the front side by grabbing the moving Holder located to the front bottom of the armrest), roll the chair on its casters to the desired location (check the sketch for reference). Roll the chair on its casters to the desired location.
NAME AND FUNCTION OF EACH COMPONENTS Shoulder Position Adjust (Moves mechanism up and down) Press and hold on Position UP/DOWN button to adjust the rollers to the desired position while under manual program or 4D Partial/ Point massage mode. Press and hold on Position UP/DOWN button to adjust the rollers to the desired position while under the body scan procedure.
NAME AND FUNCTION OF EACH COMPONENTS PRELIMINARY CHECKS Step 3: Install the Legrest Lift the legrest unit, fit the Hook of the footrest unit into the Coupling Shaft located at the Seat base (Keep the hook leveled with the coupling shaft), connect one side first then the other. Coupling Shaft Hook Connect the footrest unit with the Coupling Shaft, fit the DK Circlip to the end of the shaft and lock it by pushing down firmly (check the illustration below).
NAME AND FUNCTION OF EACH COMPONENTS Deep Shiatsu: Deep shiatsu on the back for 10 minutes. Healthy Breath: Rhythmic five-minute massage to aid with deep breathing. Massage Extend: Designed for morning or midday relaxing, it helps to boost the viability of muscles. Relaxation: Selected neck & shoulder massage techniques to soothing pain and tension in the neck and shoulders.
PRELIMINARY CHECKS Floor Protection NAME AND FUNCTION OF EACH COMPONENTS Back Mechanism Massage Width: Press WIDTH from MANUAL display, press We recommend to place a piece of thin carpet or soft mat underneath it to avoid damaging the floor. Massage chair RIGHT button then press UP or DOWN button to navigate among: Wide, Medium and Narrow mechanism roller width. Press OK button to enter the setting you desire. Selected width will show on the in-use screen.
NAME AND FUNCTION OF EACH COMPONENTS PRELIMINARY CHECKS Installation Site Clearance space for the massage chair: Ensure there is an adequate clearance for the installation:It needs 4” clearance for the recline of the backrest; It needs 24” clearance space for the extension of footrest and sliding forward of the chair. Keep it 3 feet away from the TV, radio or other audio & video appliance to avoid signal interference.
APP DOWNLOAD AND INSTALLATION Apple iOS: (iPhone or iPad devices) Open the App Store . At the top right corner, search for keywords like “Infinity Massage Chair, RT8713i or massage chair” to find the Apple app. Click “Get” at the top right corner to download and install the software. In your device settings, open Bluetooth and connect it to the massage chair. Please note: Only Apple equipment compatible with Bluetooth 3.0 can connect to the chair’s Bluetooth.
NAME AND FUNCTION OF EACH COMPONENTS FEATURES 9. Calf Massage Lights Press LIGHTS from Home display to go into lights settings: THEMES,COLORS, BRIGHTNESS, press RIGHT button then press UP or DOWN button to navigate, press OK button to enter the option you desire. +20( Calf-rubbing airbags surround each side of the lower legs while massager rollers knead the calves for extreme relaxation 10.
FEATURES NAME AND FUNCTION OF EACH COMPONENTS 1. SPACE-SAVING ZERO-WALL FUNCTION The RT8713i massage chair has the ability to move forward before performing a massage. This allows it to be placed closer to the wall than a standard massage chair. Keep this in mind when positioning the chair. Setting Press MENU button, then choose SETTING. Use the up or down button to toggle language, brightness, buttons, beep, bluetooth, or sleep mode settings. +20( 2.
NAME AND FUNCTION OF EACH COMPONENTS 6(77,1* 6(77,1* 6(77,1* NAME AND FUNCTION OF EACH COMPONENTS Note: Under both Auto Mode and Manual mode, the remote will return to In-Use page as shown below if it remains idle for 10 seconds. $872 BRIGHTNESS: Under SETTING > BRIGHTNESS function, press the right button then press up or down to select display screen brightness. Press ok to set.
FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
