User's Manual

Legrest

bracket

Legrest

rotation shaft

Legrest

bracket sleeve

DK circlip

Air valve socket

Air nozzle

Armrest unit

Air valve plug

Air hose

Air valve plug

Step 5: Other Accessories

Connect the power cable to the product power socket located at the power box.

Connect power to chair,switch ON the power button,use the controller to raise the

backrest to fully upright position.

Power plug

Power connector port

Power switch

Installation Method

Step 1, Take all massage chair units out of the cartons

Unpack the cartons and take out all sewing and other accessories out of the cartons.

Before beginning installation, please verify that all components are included(check

with the packing list carefully)

Step 2: Install Armrest Unit

Connect the two air valve plugs and one air hose to the matching numbered nozzles

on the armrest and plug in the air valve connector.(Same installation method with

the other side)

PRELIMINARY CHECKS

Thread the air hose into the air nozzle,and fit the air valve plug into the air valve port

which located at the face side of seat base,make sure they are well secured.Put the

legrest bracket sleeve into the legrest bracket,attach the legrest bracket onto the

legrest rotation shaft ,then attach a DK circlip to the end of the legrest rotation shaft

to hold the legrest in place,then zip the footrest and main chair together.