此画板不印刷 GLS540.22.6.1.3-902001/A1 210mm 143mm Deluxe Multi-function Massage Chair GLS540 USER MANUAL Please read all instructions before using. 借通用登记表 描图 校描 旧底图总号 签字 技术要求： 1.材质：157g 铜板纸； 2.尺寸：143*210mm/32K24P； 3.色号: / ； 上海荣泰健康科技股份有限公司 4.工艺：封面彩印；正反面印刷；骑马钉装订； 5.公差：±1mm； 6.外观要求：套印准确、清晰；冲裁居中、无毛边； 日期 对折线 7.成品尺寸、模切尺寸符合要求，偏差在允许范围内， 标贴尺寸的未注公差按GB/T1804-2000中等级别c执行； 标记 处数 更改文件号 设计 校对 工艺 审核 签字 标准化 审定 批准 日期 日期 图样标记 数量 文件：实物 / 共 1 页 第 1 页 中性英文说明书欧标无语音指令 GLS540.22.6.1.
Deluxe Multi-function Massage Chair GLS540 USER MANUAL Please read all instructions before using.
13) Do not use massager in close proximity to loose clothing or jewelry. 14) Keep long hair away from massager while in use. 15) Use heated surfaces carefully.May cause serious burns.Do not use over insensitive skin areas or in the presence of poor circulation.The unattended use of heat by children or incapacitated persons may be dangerous.
TECHNICAL SPECIFICATIONS Name: Deluxe Multi-function Massage Chair Model: GLS540 Rated voltage: 220-240V~ Rated frequency:50-60Hz Rated power: 180W Safety design: Class Ⅰ 19 Thank you for purchasing this product. Please read this user manual carefully before using to ensure proper installation and operation. Please keep this USER MANUAL properly for future reference.
SAFETY PRECAUTIONS TROUBLESHOOTING Safety Precautions Before using, please read the SAFETY PRECAUTIONS carefully to ensure correct operation of this appliance. Precautions and warnings listed below will help to ensure proper operation of this appliance. The classes of accidents caused by incorrect use are classified into WARNING and CAUTION.Read all WARNINGS and CAUTIONS below and follow all instructions within this manual. WARNING CAUTION Prohibited Improper operation may cause injury to users.
CARE AND MAINTENANCE Care Instructions SAFETY PRECAUTIONS Best Circumstances To treat stains on back panel,armrest,footrest,plastic parts or air hose,spot clean with mild detergent foam,then wipe it with a dry cleaning cloth. To treat stains on controller,power box,spot clean with a dry cleaning cloth. To treat stains on back cushion or pillows,use a water-based upholstery cleaner only,wipe it with moist cloth,then air dry.
NAME AND FUNCTION OF EACH COMPONENT PRELIMINARY CHECKS Feet Extension External Structure Headpiece Back cover Quick buttons Armrest Head pillow Press and hold “ ” or “ ”button to extend (make sure there is enough clearance) or retract the footrest to the length you desire for better massage experience,release the button to fix the position.
PRELIMINARY CHECKS Commissioning Use the controller to recline the backrest to its lowest position,raise and extend the footrest to its top position, make sure there is enough clearance before commissioning. Return the backrest and footrest back to its default position after commissioning and turn off the power switch. To choose the massage program, please check the Instructions of Controller and Instructions of Touchscreen Controller for reference.
NAME AND FUNCTION OF EACH COMPONENT Controller Instructions Zero Gravity Positions Press to put massage chair into Zero Gravity position,the indicator light of the button turns green when Zero Gravity Position 1 is chosen, it turns blue when Zero Gravity Position 2 is chosen. Heating Press to turn on heating,the indicator light of the button turns yellow when level 1 heating is chosen, it turns red when level 2 heating is chosen.
PRELIMINARY CHECKS Position & Placement for Installation Clearance space for the massage chair: Ensure there is an adequate clearance for the installation:It needs 10cm clearance for the reclining of the backrest;It needs 60cm clearance space for the extension of footrest and sliding forward of the chair. Keep it 1 meter away from the TV,radio or other audio/video appliance to avoid signal interference. 10cm 60cm Keep the distance between the power socket and power switch within 1.5 meter.
FUNCTIONS AND FEATURES 1. One Press Control Sliding Forward It will slide forward by 28 cm and recline afterwards. Glider recliner linkage mechanism to save space and provide utmost relaxing position. PRELIMINARY CHECKS Moving the Massage Chair Roll the chair on its casters to the desired location. Incline the backrest to upright position. Turn off the power switch and unplug the appliance from the electrical outlet.
PRELIMINARY CHECKS PRELIMINARY CHECKS Thread the air hose into the air nozzle,and fit the air valve plug into the air valve port which located at the face side of seat base,make sure they are well secured.Put the legrest bracket sleeve into the legrest bracket,attach the legrest bracket onto the legrest rotation shaft ,then attach a DK circlip to the end of the legrest rotation shaft to hold the legrest in place,then zip the footrest and main chair together.
PRELIMINARY CHECKS PRELIMINARY CHECKS Hold the armrest unit up and hook the bracket 2 onto the carrier groove,slowly push the armrest unit back into the chair linkage until bracket 2 aligns completely with bracket 4,insert bracket 1 into bracket 3,use a screw to secure the armrest into place.
