User's Manual
Table Of Contents
- 一、Functions and features
- 三、Development and debugging
- 3.3.2 Burning steps
- 1) Before burning the picture font library, make sure that the bottom layer has been burned. You can open the configuration debugging interface to connect to the code file to observe whether it can communicate. If it fails to communicate, first reset ...
- 2) After adding the files to be burned in the U disk according to the second step, connect it to the USB port of the motherboard, and then power on the motherboard.
- 3) Under normal circumstances, the display screen will start to flash and display burned pictures after a few seconds, and the U disk indicator light will start to flash.
- 4) If you cannot see the burning process, please make sure to unplug the U disk under the premise that the U disk indicator is not flashing.
- 四、Description of environmental indicators
- 五、Connect with external controller
- 空白页面
Serial
number
name model Icon Vendor
1
AMP connector socket
sheath
4-1437290-0
Tyco Electronlcs
2 AMP connector metal
pin
3-1447221-3
Tyco Electronlcs
3
USB analog debugger
HX-USB-SIMULATOR
Shanghai Huaxing
Digital Company
1. Software development platform
LM Studio supports application development based on Huaxing’s special LM language, and provides a
software platform integrating project management, code writing, compilation, and debugging functions for
Huaxing’s controller and display product application development, and improves application development
efficiency and quality.
With the help of the GUI programming module of LM Studio, users can develop in a graphical manner. They
only need to create some controls on the interface and associate these controls with the corresponding
variables. At the same time, some LM script programs corresponding to the keys are added to realize what
you see is what you get.