User's Manual
Table Of Contents
- 一、Functions and features
- 三、Development and debugging
- 3.3.2 Burning steps
- 1) Before burning the picture font library, make sure that the bottom layer has been burned. You can open the configuration debugging interface to connect to the code file to observe whether it can communicate. If it fails to communicate, first reset ...
- 2) After adding the files to be burned in the U disk according to the second step, connect it to the USB port of the motherboard, and then power on the motherboard.
- 3) Under normal circumstances, the display screen will start to flash and display burned pictures after a few seconds, and the U disk indicator light will start to flash.
- 4) If you cannot see the burning process, please make sure to unplug the U disk under the premise that the U disk indicator is not flashing.
- 四、Description of environmental indicators
- 五、Connect with external controller
- 空白页面
loop
3.12 Dedicated TSO controller
Provides the unique
"transient-steady-state-overshoot"
controller and two-position controller unique
to LM measurement and control components
3.13 filter
Provides Butterworth filters for
process industry automation
4
Human-computer
interaction
4.1 Keyboard scan Support 5 buttons
4.2 Power saving function
Screen brightness automatic/manual
adjustment
5 input Output
5.1 Switch input Support switch input
5.2 Analog input Support analog input
5.3 Frequency input Support TI input
5.4 Switch output Support switch output
5.5 Analog output Support analog output
5.6 Motor output Support stepper motor output
1. Dedicated display and control development environment
Huaxing's self-developed LM Studio display and control development environment, based on
the IEC61149 standard, provides LM Studio-GUI screen preparation tools, and integrates a
large number of function blocks to quickly develop screens and configuration programs.
2. Adapt to harsh environments
Can be used in severe cold and hot environments: -25 degrees low temperature, 65
degrees high temperature
Anti-reverse power supply design, self-protection greater than 37V to prevent burnout
Suitable for environments such as strong vibration, dusty rain and lightning strikes in field
operations
3. It can be seamlessly connected with Huaxing remote monitoring system
Support remote debugging and brush program, convenient for after-sales maintenance
Support remote unlocking machine to facilitate credit management