User's Manual
Table Of Contents
- 一、Functions and features
- 三、Development and debugging
- 3.3.2 Burning steps
- 1) Before burning the picture font library, make sure that the bottom layer has been burned. You can open the configuration debugging interface to connect to the code file to observe whether it can communicate. If it fails to communicate, first reset ...
- 2) After adding the files to be burned in the U disk according to the second step, connect it to the USB port of the motherboard, and then power on the motherboard.
- 3) Under normal circumstances, the display screen will start to flash and display burned pictures after a few seconds, and the U disk indicator light will start to flash.
- 4) If you cannot see the burning process, please make sure to unplug the U disk under the premise that the U disk indicator is not flashing.
- 四、Description of environmental indicators
- 五、Connect with external controller
- 空白页面
Serial
number
version
number
content Date
1 V1.0 New 2020.07.13
Preface
SECD-7I0B-03 (H) is a monitoring and control platform specially
designed for construction machinery and agricultural machinery by
Huaxing Digital Company. The display is based on the ARM platform
and adopts a 7.0-inch, 800×480 resolution TFT industrial-grade liquid
crystal display, which has good human-computer interaction performance.
In addition to the display function, it also integrates control
and communication functions: support digital and analog signal input
and output, motor control, CAN, LTE, GPS, and can seamlessly
connect with the remote monitoring center.
The display adopts a flat-panel front panel design with a
beautiful industrial appearance. Electromagnetic compatibility, IP
protection, and high level of anti-vibration impact can meet the
environmental index requirements of harsh working conditions.
It supports the LM Studio integrated development environment
independently developed by Huaxing, and the configuration program and
screen development are easy.