User's Manual
Table Of Contents
- 一、Functions and features
- 三、Development and debugging
- 3.3.2 Burning steps
- 1) Before burning the picture font library, make sure that the bottom layer has been burned. You can open the configuration debugging interface to connect to the code file to observe whether it can communicate. If it fails to communicate, first reset ...
- 2) After adding the files to be burned in the U disk according to the second step, connect it to the USB port of the motherboard, and then power on the motherboard.
- 3) Under normal circumstances, the display screen will start to flash and display burned pictures after a few seconds, and the U disk indicator light will start to flash.
- 4) If you cannot see the burning process, please make sure to unplug the U disk under the premise that the U disk indicator is not flashing.
- 四、Description of environmental indicators
- 五、Connect with external controller
- 空白页面
5.1
typical application
Time function
Realize a class of functions that are used
in discrete manufacturing and batch process
industries, which are related to time and use
switching and analog as output functions
5.2
Process volume
processing
Provides a class of functional functions for
process industry automation (including
specific calculation methods for
engineering quantities such as flow and
temperature)
5.3
Control typical
links
Provides typical links for controller design
and control system simulation
5.4 PID controller
Provides a PID controller that accounts for
more than 90% of the total control loop
5.5
Dedicated TSO
controller
Provides the unique
"transient-steady-state-overshoot"
controller and two-position controller
unique to LM measurement and control
components
5.6 filter
Provides Butterworth filters for process
industry automation
6.1
GUI screen
GUI system Build GUI system
6.2
GUI graphic
control library
Create page, icon, text, bar graph, meter
pointer and other controls
6.3
GUI script
library
Dedicated to the process control, numerical
calculation and timer function of the GUI
system
For specific component applications, see "LM Reference Manual" under the "Help" menu of the LM Studio
software.
3、Application examples
3.1 Screen compilation
The screen preparation adopts the graphical "what you see what you get" method for development. It
includes the following steps:
Create a new GUI project
Add GUI controls
Generate GUI code template