User's Manual
Table Of Contents
- 一、Functions and features
- 三、Development and debugging
- 3.3.2 Burning steps
- 1) Before burning the picture font library, make sure that the bottom layer has been burned. You can open the configuration debugging interface to connect to the code file to observe whether it can communicate. If it fails to communicate, first reset ...
- 2) After adding the files to be burned in the U disk according to the second step, connect it to the USB port of the motherboard, and then power on the motherboard.
- 3) Under normal circumstances, the display screen will start to flash and display burned pictures after a few seconds, and the U disk indicator light will start to flash.
- 4) If you cannot see the burning process, please make sure to unplug the U disk under the premise that the U disk indicator is not flashing.
- 四、Description of environmental indicators
- 五、Connect with external controller
- 空白页面
LM Studio integrates a large number of mature and easy-to-use component libraries, as follows:
Component
number
Big category
Category
description
Function introduction
1．1
System kernel
System functions Implement system definition
1.2 Mission control
Realize the definition of task body
2.1
Basic services
Process control
Realize the sequence relationship, branch
relationship, and cycle relationship in the
task body software
2.2
Parameter feature
modification
Component parameter format definition
2.3
Integer
operations
Integer definition, assignment, extreme
value, limiting, four arithmetic
operations, logic operations, comparison
and other functions
2.4
Floating point
arithmetic
Realize floating-point number definition,
assignment, extreme value, limiting, four
arithmetic operations, elementary function
operations, comparison and other functions
2.5
Data conversion
processing
Realize normalization processing, data
conversion processing between different
types of data and different engineering
quantities
2.6
Selection
function
Realize the choice relationship between
number and number
2.7
Approximation
function
Provides approximate calculation methods
such as the Taiwanese series approximation
of the piecewise continuous function and the
multi-segment straight line approximation
of the curve
3.1
communication
CAN communication Realize CAN data transmission
3.2
GPRS/GPS
communication
Realize GPRS/GPS data transmission
3.3
4
Realize RS232 serial data transmission
input Output
Input and output
drive
Realize digital input and output, analog input and
output, pulse input, motor output, and real-time clock,
keyboard, encoder
and other peripheral communication
Serial
communication