Shanghai Qiangling Electronics Co., Ltd. TCPWIFI8711-2400 Module User Manual Module Model ：TCPWIFI8711-2400 Version：V2.
Shanghai Qiangling Electronics Co., Ltd. Contents 1. Introduction................................................................................................................................4 2. Technical specification.................................................................................................................5 3. Electrical characteristics................................................................................................................6 4. Pin Definition (Top view)....
Shanghai Qiangling Electronics Co., Ltd. Changes Record *A - Add Versio M - Modify Date A*M*D Modifier V1.0 2017-06-06 A RuanCJ First release V1.1 2017-10-10 M RuanCJ Modify definition of Pin V1.2 2018-03-12 M RuanCJ Modify definition of Pin V2.
Shanghai Qiangling Electronics Co., Ltd. 1. Introduction The T C P WIFI8711 module is a 2.4GHZ wireless WiFi module, Meet the wireless standard IEEE 802.11b/g/n20/ n40.The module is designed specifically for smart LED lights, Support a single dimmer, dual color temperature light, color RGB lights (RGB / RGBW \ RGBCW) and other product forms, Support HomeKit protocol,Support based on amazon alexa voice control, and the development of dedicatedAPP.
Shanghai Qiangling Electronics Co., Ltd. 2. Technical specifications Network Standard Wireless:IEEE 802.11b,IEEE 802.11g,IEEE 802.11n (HT20), IEEE 802.11n (HT40) Channel No. 1-11(Channels vary from country to country) Frequency Range 2.412-2.462GHz(Frequency varies from country to country) Test Item Transmit Power EVM Receive Sensitivity nce Max Value Unit Value - 21 dB m 802.11g 6Mbps - 20.52 21 dB m 802.11n(HT20)M CS 0 - 20.64 21 dB m 802.11n(HT40)M CS 0 - 20.
Shanghai Qiangling Electronics Co., Ltd. 3. Electrical characteristics parameter 3 .3 V p o w e r su p p ly symbol condition V C C _3V 3 Minimum value 3 .1 5 3 .3 V p o w e r co n su m p tio n Typical Maximum value value unit 3 .3 3 .4 5 V 80 400 mA DC electrical characteristics for digital I/Os H ig h L e ve lIn p u t V o lta g e V IH 2 .8 - 3 .6 V L o w L e ve l In p u t V o lta g e V IL -0 .3 - 0 .3 V H ig h L e ve lO u tp u t V o lta g e VO H 2 .2 - 3 .
Shanghai Qiangling Electronics Co., Ltd. 4. Pin Definition(Top View) 5. Pin Assignment Pin 1 2, 12-13 15 symbol I/O Description VDD P 3.
Shanghai Qiangling Electronics Co., Ltd. 6. Mechanical structure 6.1 Module package dimensions TOP 6.2 Module physical map and size 1. Module size (30 * 15 * 2.
Shanghai Qiangling Electronics Co., Ltd. 7. Attentions for Antenna Followings are attentions for on-board antenna. 1. Components and GND are not allowed to place in red zone below. It is suggested to be hollow. 2. Metals should be far away from antenna, at lease 10mm away from the highest component. 3. Antenna can not be covered by metal shell. 4. Components are prefer to place in red zone below to reduce the impact to antenna. Also you can ask for technical support about layout design.
Shanghai Qiangling Electronics Co., Ltd. 8. Regulatory Module Integration Instructions 8.1 List of applicable FCC rules This device complies with part 15.247 of the FCC Rules. 8.2 Summarize the specific operational use conditions This module can be used in household electrical appliances as well as lighting equipments. The input voltage to the module should be nominally 3.0~3.6 VDC ,typical value 3.3VDC and the ambient temperature of the module should not exceed 85 .
Shanghai Qiangling Electronics Co., Ltd. 8. 7 Label and compliance information The outside of final products that contains this module device must display a label referring to the enclosed module. This exterior label can use wording such as: “Contains Transmitter Module FCC ID: NIR-WIFI8711 ”,or “Contains FCC ID: NIR-WIFI8711”, Any similar wording that expresses the same meaning may be used. 8.
Shanghai Qiangling Electronics Co., Ltd. 2. Open" UI_mptool.exe". Firstly, you must “Initialize” the DUT,and then the four sub interface: Main,PSD,Efuse,Reg can be operated. 3. Main: Note: When you select "Initialize with Pidx in EEPROM", a It means that TX Power Index Column A will show the Efuse Index Value, which also have been limited by “Power by rate table ”(limit power by rate in each mode) and “Power limit table ”(limit power by channel plan value) before shown.
Shanghai Qiangling Electronics Co., Ltd. The product under test is placed into a normal ‘paired’ mode with another WIFI device, as per the normal intended use of the product (for example, transferring data). FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
