User's Manual

Note: The previously selected group (or all groups, if selected) remains the active

group on the remote control. To take action on that same group again, you do not

have to press the group button again.

Brightening and Dimming Lights

You can brighten and dim your lights even if though they are not

connected to a ﬁxture with a dimmer switch. To set the brightness

level of lights, you must set the level for an entire lighting group:

01. Press the Group Number button for the lighting group you

want to dim or brighten. If you want to dim or brighten ALL

lighting groups, press the 1- 4 button.

02. To dim the lights in the selected group(s), press and hold

the left side of the dimmer button. Release the button when

the lights reach the level you want. Lights will dim more the

further to the left you press.

03. To brighten the lights in the selected group(s), press and

hold the right side of the dimmer button. Release the

button when the lights reach the level you want. Lights

will brighten more the further to the right you press. They

automatically stop when they reach full brightness.

The lights in the group will remember the latest brightness level

when you turn them on and off.