User's Manual

23
on the back of the unit over the screws and then gently pressing the Gateway downward until it is secure.
3. Download and Install the Smart Device Application
The smart device application installs like other applications you may already have on your smart device. At the
application download site for your device, search for TCP Lighting. When you find the application, simply
download and install it. Refer to the Smart Device Application chapter for more information about the
application’s basic user interface.
Startup and Login
Make sure your smart device is connected to and in range of your wireless router, and then start the application
on your smart device. When the application starts, it automatically searches for your Gateway through your
wireless router. If the application finds a Gateway on your local network, it automatically connects to the
associated lighting network.
Note: For future connections, if your smart device does not find a local Gateway, it will try to access your Gateway remotely via
the Internet or mobile data connection. For more information on UPNP, refer to “Wireless Router” section under chapter
System Requirements. For your smart device to connect remotely to your Gateway you must already have created an online
account (explained next) and your Gateway must be connected to the Internet (for example, through your router).