Remote Lighting Kit
Table of Contents Lighting Kit Overview System Requirements Basic Concepts of Wireless Routers and Networks Basic Concepts of Network Light Bulbs Planning Your Lighting Network Manually Powering Light Bulbs On and Off Gateway Overview Gateway Indicators Remote Control Overview Remote Control Indicators Installation and Setup Smart Device Application Network Connection My Lights Smart Controls Settings Managing Rooms Managing Lighting Groups Managing Lights and Fixtures Remote Access Web Application Smart Co
Lighting Kit Overview The TCP lighting kit includes a wireless smart lighting system that helps make the lighting in your home more energy efficient and easier to manage. The kit includes A19 LED light bulbs and a remote control that work together to help you manage your lighting wirelessly. ® Your lighting kit also includes a GreenWave Reality Gateway, which provides an enhanced network connection to your light bulbs.
System Requirements To use a Web browser or smart device to manage your lighting, your computer or smart device and home network must meet the following minimum requirements. If your system does not meet these requirements, you can still use your lighting kit with the remote control. Computer (Local User Interface) • Computer to be connected to the Local Area Network i.e. to the router on which the Gateway is connected. Any of the following Web browsers • ® - Microsoft Internet Explorer 8.
- Android Supported Screen Sizes All Android device screen sizes are supported (phones, phablets, tablets). Below are the descriptions of the different Android screen sizes available in the market • TM Small Screen: Size is usually less than 3.8” (ex. HTC Wildfire – some known issues remain) • Normal Screen: Size is usually greater than or equal to 3.8” but is less TM than 5” (ex.
iPhone 4S iPhone 4 iPhone 3GS iPad Air iPad mini (retina) iPad mini iPad 4 gen iPad 3 gen iPad 2 iPad iPod touch 5 gen iPod touch 4 gen th rd nd gen th th Wireless Router For the smart device application to manage your lighting locally within your home, your home network must use a wireless router to which your smart device is connected.
can try using a different router. Refer to your smart device’s documentation for more information on connecting it to your home network. Note: Your network lighting is designed for a wireless home network and not a corporate network. Basic Concepts of Wireless Routers and Networks Many homes today have a home network router to allow multiple devices in the home to connect to the Internet as well as each other.
Wireless Network Before wireless networking became common, routers only allowed for computers and devices to connect physically through cables. This limited where you could place your computer or device based on the location of the router and the length of the cable. With the advent of wireless networking in the home (commonly referred to as “Wi-Fi”), many routers began including wireless technology in addition to the physical cable connections.
With your wireless light bulbs connected to the Gateway, your smart device can control the light bulbs as long as the smart device is running the appropriate application. The lighting application enables your smart device to connect to the Gateway through the home wireless router connection and in turn control and manage the attached network lighting. Local vs.
Example of Wireless Network The following illustration shows an example of a wireless home network with lighting: Basic Concepts of Network Light Bulbs Network light bulbs work with your light fixtures the same way as standard light bulbs. They are different, however, in a couple of ways: • The lighting element in the light bulb uses energy-efficient technology. • The light bulb includes wireless technology that allows the light bulb to connect to a network and be managed remotely.
Because the light bulbs can be connected to a network, you have greater flexibility in how you use them. For example, you can program your lighting network so that when you press a button upon arriving home, an entryway and a hallway light turn on. Or when you go to bed, your remote control can turn off all lights on the network. You can also use your smartphone to control your lighting network and set up schedules to automatically turn your lights on and off at predefined times.
Rooms When organizing your network light bulbs, you can set them up into rooms. Then you can use your smart device to turn on and off light fixtures in selected rooms. A room is a set of network light bulbs that exist in a physical room in your home and can be controlled through your smart device or Web browser. For example, a bedroom in your home might have two light fixtures with network light bulbs and one fixture with a standard light bulb.
Network Range If you are using a smart device or Web browser, then your network range is virtually unlimited since you can access your lights through the Internet. As long as your Gateway is connected to the Internet through a router, you could access your lighting network through your smart device or Web browser from a remote location.
Controlling Lights without Your Smart Device or Remote Control If your smart device or remote control is not available and you want to turn on a network light bulb, you can manually turn off the light fixture, wait for 5 seconds, and then turn it back on. The intentional power failure and restoration will cause the light bulb to power on to full brightness. Similarly, if you want to turn off a network light bulb without your smart device or remote control, you can manually turn off the light fixture.
Gateway Overview The following illustration shows the different ports, buttons, and indicators on the Gateway. You can use it as a reference during installation or while following the instructions for performing tasks. 2 3 4 1 5 6 1. Sync button: Button that syncs devices and shows current activity and status of synced devices. 2. WAN (Internet connection) error indicator: Indicator that shows whether or not the Gateway is connected to the Internet. 3.
Gateway Indicators Your Gateway has indicators that display the following patterns and colors to show you its current status: Power indicator—off (no color): Gateway is off. Power indicator—steady white: Gateway is on. Network indicator—off (no color): Gateway is connected to the network. Network indicator—red: Gateway is not connected to the network. Check that the Gateway is connected to your network router. Internet indicator—off (no color): Gateway is connected to the Internet.
Remote Control Overview The following illustration shows the different buttons on the remote control. You can use it as a reference while following the instructions for performing tasks. 5 3 1. Press the 1-4 button to select all lighting groups to turn on, turn off, dim, or brighten. 2. Press a Group Number button to select that lighting group to turn on, turn off, dim, or brighten. Also use these buttons to program the lights in the corresponding group.
Remote Control Indicators The remote control has four group number indicator lights and one primary status indicator light that display the following patterns to show you the remote control’s status during different processes: Process Indicator and Description Initial Remote Control Setup Primary indicator flashes steadily: During the process of installing batteries for the first time, the remote control is determining the best signal for your lighting system.
*NOTE: Cloning process for the Remote Control only works if there is no Lighting Gateway in the setup.
Installation and Setup Installation of your lighting kit includes the following tasks: 1. Install the Gateway. 2. Install the light bulbs on your network. 3. Download and install the smart device application. 4. Set up the light bulbs in the smart device application 5. If you will be using the remote control with your lighting network, then you must also prepare it for use. Note: Also see the installation tips at the end of this chapter.
1. Reset Existing Network Light Bulbs, if Any If you are not upgrading from a remote control lighting kit, you can skip this step. If you are upgrading from a remote control lighting kit, then you must reset all light bulbs that you previously installed as part of that kit’s setup. The easiest way to reset all light bulbs is to do so using the following procedure. 1. Turn the main switch ON for two seconds. 2. Turn the main switch OFF for two seconds. 3. Repeat steps 2 and 3 for two more times. 4.
b. While pressing the Program button, press and release the On/Off button (keep the Program button pressed). c. While still pressing the Program button, press and release the 1-4 button. d. While still pressing the Program button, press and release the On/Off button again. e. Release the Program button. All group number indicator lights and the primary indicator light flash slowly for 30 seconds. 2.
3. Power the Gateway by plugging it into an electrical outlet using the included power adapter. The Gateway illuminates while it is attempting to connect to the Internet. 4. Verify that the Gateway is connected. The Gateway is connected when both the network indicator and the Internet indicator turn off, the sync button is green, and the power indicator is white Mounting the Gateway on a Wall You can mount the Gateway to a wall with screws, using the mounting slots located on the back of the Gateway.
on the back of the unit over the screws and then gently pressing the Gateway downward until it is secure. 3. Download and Install the Smart Device Application The smart device application installs like other applications you may already have on your smart device. At the application download site for your device, search for TCP Lighting. When you find the application, simply download and install it.
Account Setup Most of the time, you will probably access your lighting network when you are at home and connected to your home network. However, if you want to have access to your lighting kit remotely through the Internet or a mobile data connection, you must first set up an online account. This account will provide authentication for you when you access your lighting kit remotely. You must remain connected locally to your lighting network when you create your account. To set up your account: 1.
4. Install Light Bulbs on Network (through Manual Gateway Operation) The light bulbs in your lighting kit come pre-connected to the Gateway; however, you must still install the light bulbs so that the Gateway can find them on the network. Note: If you are installing a new light bulb that did not come with your kit (for example, if you reset network light bulbs from a remote control kit), then you must manually connect the light wirelessly to your Gateway.
b. Press the sync button on the Gateway once to enable the connection. The activity indicator begins to display a clockwise rotating pattern. c. When the light bulbs are connected to your Gateway, they turn on to full brightness. Press the sync button on the Gateway again to stop the network search process (otherwise the Gateway will stop the search process automatically in two and half minutes after finding the most recent light bulb). 6.
2. Tap Yes. Your smart device then walks you through setting up each new light bulb. 3. Look for the light bulb that is dimming and fading. This is the light bulb you are currently configuring on your smart device. 4. The setup wizard guides you through specifying a name light, assigning a room for the light, and selecting an icon (or taking a picture of the light) to help identify the light. 5. Repeat these steps for each flashing light bulb.
must manually connect the old remote control to your Gateway. These steps are also provided in the Remote Control chapter. Installation Tips Review the safety information. Be sure to review the information contained in the “Safety Information” chapter for important safety information you should follow. Keep radio signals clear. The hardware in your lighting kit has antennas built-in for radio communication.
Smart Device Application The smart device application makes working with your network lighting easy by allowing you to use your Smartphone, Tablet (or iTouch), or TV to set up, manage, and control your lights. Using your smart device, you can configure lights into rooms and lighting groups, turn lights on and off, set up Smart Controls to automatically control lights, and much more.
Note: This connection process applies to any local network and Gateway in range of your smart device. For example, if you are at a friend’s home and they have a similar lighting kit set up, your smart device application will connect to their lighting Gateway if you are connected to their local network through their wireless router (which means your friend would have given you access to log in to their home network).
Room and room color Swipe screen left or right to navigate rooms Light bulb dimmer Drag down to dim or drag up to brighten light bulb Light bulb/fixture control Tap to turn light bulb/fixture on or off. Light turns on to the most recent dimmer setting. Swipe screen up and down to access all light bulbs/fixtures if the room contains more than can fit on one page. Room On/Off Tap corresponding button to turn on or off all lights in the room.
Smart Controls Smart Controls allow you to set up user-defined schedules and other controls for automatically turning your lighting on or off. For example, you can set up a Smart Control schedule that automatically turns on selected lights at sunset and then turns the light bulbs back off at midnight. Smart Controls can control one or more light bulbs, light fixtures, or entire rooms. Keep in mind that activating a Smart Control is a different action than turning on lights.
bulb(s), no matter how you edit or mange the rooms, the Custom Smart Control will still take action to the light bulbs that are selected.
Smart Control list Tap to activate Manual Smart Control or a Custom Scene Default Smart Controls Home, Away, and Night are default Smart Controls that come preconfigured. Custom Smart Controls Swipe the arrow to edit the settings of a custom Smart Control or to access the delete feature to remove the custom Smart Control. Create Smart Control Tap to start wizard to create your own custom Smart Control. Smart Control menu Tap to access this page.
Default Smart Controls Current features: The Smart Control page includes a set of default Smart Controls that come preconfigured within the application: • The Home Smart Control is typically used when people return home after being away. This Smart Control turns on all of your network light bulbs to full brightness. • The Away Smart Control is typically used when everyone leaves the house (for example, when going to school or work for the day). This Smart Control turns off all lights.
There are three types of custom Smart Controls: • A schedule Smart Control allows you to automatically turn on and off lights based on specific days and times. For example, you could use this Smart Control to have selected lights automatically turn on at sunset and turn off at midnight. • A Manual Control Smart Control allows you to turn the lights on or off using your Smart Phone, or the web. • A Custom Scene Smart Control allows you to set devices both on and off or set specific dimming levels.
5. Tap to select the rooms, lights, and/or fixtures you want to turn on or off with this Smart Control, and then tap Next. 6. 7. Edit Schedule i. Tap ON/OFF ii. Create new ON and OFF times, then tap Next. Confirm your selections. Tap an item if you want to change it. Tap Confirm to save the Smart Control To create a Manual Control Smart Control: 1. Tap the Smart Control menu at the bottom of the page. 2. When the Smart Control page opens, tap Create New Smart Control.
4. In Smart Control, tap the Manual Control name you just created. You can turn on or off the lights selected in that smart control as you tap Power On or Power off. To create a Custom Scene smart Control: 1. Tap the Smart Control menu at the bottom of the page. 2. When the Smart Control page opens, tap Create New Smart Control. A setup wizard guides you through setting up your Smart Control. 3.
lights on. Activating the Smart Control means that the Smart Control will take the action you set in step 6 at the time you schedule. You have two options for setting this time: • Sunrise/Sunset activates the Smart Control at sunrise or sunset (whichever you select). By using this option the actual activation time will automatically change as the time of sunrise and sunset changes throughout the year. • Set Time activates the Smart Control at the exact time of day you specify. b.
Settings The Settings page allows you to perform such tasks as edit lights, create fixtures, manage rooms, and add new light bulbs. You can also access this page if you want to set up your online account for remote access to your lighting network (discussed in the Installation and Setup chapter) or to log out of the application. Note that these detailed settings options are available only on the Local Mobile Application.
Your lights and fixtures Tap to view the list of all lights and fixtures on your network, create a new fixture, or edit settings for a light or fixture. Add new lights Tap if you have added a new light bulb to your network and need to have the application connect it to the gateway. Log out Tap to log out of the application. Manage rooms Tap to perform such tasks as create a new room, rename a room, change a room color, and organize lights into a room.
Managing Rooms Creating a New Room You can create rooms to represent the physical rooms in your home and group their corresponding lights. To create a room: 1. Tap the Settings menu at the bottom of the page. 2. When the Settings page opens, tap Manage Rooms. 3. When the Manage Rooms page opens, tap Create New Room. 4. On the Create New Room page: a. Tap Enter Room Name to type a name for your new room. b. Tap Edit Color to select a color to represent the room. c.
4. When the room page opens, tap any of the items you want to edit (such as the room name or color), and make your edits. 5. To remove a light or fixture from the room, click that light’s or fixture’s removal icon: Removal icon Tap to remove the light or fixture from room. 6. To add a light or fixture to the room, tap Add More Lights. 7. When you are finished with your edits, tap Save.
color for the new bulb. However, if you skip the setup wizard process, the light bulb remains grouped under the black room color. You can move a light bulb to a different room and room color at any time (refer to the Settings section later in this chapter). Managing Lighting Groups You can organize your light bulbs into lighting groups so that you can control groups of them together through your remote control (refer to the Remote Control chapter). To add or remove a light bulb from a lighting group: 1.
Selected Lighting Group Unselected Lighting Group The light bulb belongs to a lighting group if the number is shaded. The light bulb does not belong to a lighting group if the number is not shaded. Managing Lights and Fixtures Adding Light Bulbs to Your Network When you first set up your lighting network, the application walks you through setting up all of the light bulbs in your kit. If you add a new light bulb to your network, you must connect to and set up that light bulb.
3. Install the new network light bulb into the light fixtures as you would any standard light bulb. 4. Turn power on to the light fixtures. The light bulbs will brighten and dim while attempting to connect wirelessly to your Gateway. 5. Press the sync button on the Gateway once to enable the connection. The activity indicator begins to display a clockwise rotating pattern. 6. When the light bulbs are connected to your Gateway, they turn on to full brightness.
12. Tap Yes. Your smart device then walks you through setting up each new light bulb. 13. Look for the light bulb that is dimming and fading. This is the light bulb you are currently configuring on your smart device. 14. The setup wizard guides you through specifying a name light, assigning a room for the light, and selecting an icon (or taking a picture of the light) to help identify the light. Creating a Fixture You can set up any grouping of light bulbs to operate as one multi-fixture light.
control together. You could create a fixture that includes both of them so that you can control them together as if they were part of one light fixture. Then you could perform tasks on that fixture, such as turning it on or off, dimming or brightening the lights, or creating a Smart Control to control it. To create a fixture: 1. Tap the Settings menu at the bottom of the page 2. When the Settings page opens, tap Your Lights & Fixtures. 3. When the Lights & Fixtures page opens, tap Create New Fixture.
Editing a Light or Fixture Before starting this procedure, make sure the light or fixture you are editing is powered on.To edit a light or fixture on your network: 1. Tap the Settings menu at the bottom of the page. 2. When the Settings page opens, tap Your Lights & Fixtures. 3. When the Lights & Fixtures page opens, tap the light or fixture you want to edit. The Light/Fixture page opens and the selected light or fixture begins to dim and brighten to help you physically identify it. 4.
Removing a Light Bulb Manually If the Smart device, Web browser, or handheld remote control is not available you can remove a light bulb from the network by turning power to the light fixture off and on three times consecutively to reset the light bulb. During this process, leave the power off for at least two seconds and then on for one second (after the third cycle, leave the power on). When the light bulb has been removed from the network, it will brighten and dim continually.
2. When the Settings page opens, tap Log Out. The application logs you off of the current network and opens the login page for you to log in to your own account. 3. On the login page enter your user name (email address) and password, and then tap Login. 4. Once you have successfully logged in, you can manage your lighting network the same way as if you were connected locally. Forgotten Password If you forget your password, you can reset it: 1.
Web Application While you will typically use the lighting application on your smart device to manage your lighting network, you can also use your computer’s Web browser to access our Web-based application to manage your lighting network. The Web application has the same options as your smart device application for managing and controlling your lights.
Accessing the Web Application You can access the Web application on your computer using any of the Web browsers listed in the System Requirements chapter. Use either of the following Web addresses, depending on your type of system: • On a PC: lighting • On a Mac: lighting.
Smart Controls As with the smart device application, you can access the Smart Control page to create, edit, and activate default Smart Controls and your own custom Smart Controls: Smart Control menu Click to access this page. New Smart Control Smart Control toolbar Click to start wizard to create a custom Smart Control. Click an icon to quickly activate that Smart Control. Options Button appears when you place mouse over the Smart Control.
Light Selection in Smart Controls When creating or editing a Smart Control, the selection page allows you to select the lights and rooms you want to control: Back Click to return to the previous page. View items to select Included items Drag any of the available rooms or lights from the right side to include them in the Smart Control. For a schedule Smart Control, all of the selected items turn on and off together.
Schedule Setting in Smart Controls When creating or editing a schedule or lighting scene Smart Control, the schedule page allows you to specify the days and times to activate and deactivate the Smart Control: Back Click to return to the previous page. Target options Click the + button to add a new target (a time at which lights are turned on or off) to the schedule. You can have multiple targets. Click the button to remove a selected target from the schedule.
My Home The My Home page allows you to control your lighting network. This page is similar to the My Lights page in the smart device application and provides access to all of your light bulbs and fixtures on your lighting network: My Home menu Click to access this page. Smart Control toolbar Click an icon to quickly activate that Smart Control. Room card selection Click a room card to bring it to the front, or click the left or right arrows to bring each room card to the front, one at a time.
Room Selection from My Home Page When you select a room on the My Home page, you can manage all of the lights and fixtures in that room: Back Click to return to the My Home main page. Edit room Click to open the wizard to identify and rename the selected room. Room controls Control the lighting for all lights and fixtures in the entire room. Click a button to power on or off all lighting, and drag the slider to set the dimmer setting for all lights when they are on.
Light or Fixture Selection from My Home Page When you select a specific light bulb or fixture on the My Home page or on the Room page, you can manage different properties for that light: Smart Controls Back Click to return to the My Home main page. Dimmer Drag the slider to set the dimmer setting when the light is powered on. Click an icon in the toolbar to quickly activate that Smart Control, or click the Smart Control tab to access the Smart Controls that control the selected light.
Settings The Settings page in the Web application is different from the Settings page in the smart device application. In the Web application, the Settings page contains only information that is applicable for advanced users or technicians.
Remote Control You can use the remote control when it is not convenient to use your smart device to control your lighting. This chapter provides general concepts about the remote control, steps for setting up the remote control for use, and steps for general remote control operation. Note: Some tasks in this chapter require pressing the Program button, which is located inside the battery compartment on the back of the remote control. Be sure to press this button only as directed in the instructions.
Lighting Groups When organizing your network light bulbs, you can set them up into lighting groups. Then you can use your remote control to turn on and off light bulbs in selected lighting groups. A lighting group is a set of network light bulbs that you can control together through your remote control. For example, you might have a lighting group that includes light bulbs on the same floor.
Remote Control Range When using your remote control, you must be within range of your lighting network for the remote control to be able to control your lighting. However, this does not mean that it has to be within range of all network light bulbs. Since the light bulbs are interconnected across the network, they can pass commands to each other as long as they are within network range of each other.
Once this process is complete, you can use the remote control as discussed in the rest of this chapter. Connecting a New or Pre-existing Remote Control to the Gateway The remote control in your lighting kit is already connected to your Gateway by default, so it is ready to use after you prepare it as discussed above.
1. Make sure your remote control is in range of the Gateway. Remove the battery cover from the back of the remote control so that you have access to the Program button. 2. On the Gateway, press the sync button once. The activity indicator begins to display a clockwise rotating pattern. 3. On the remote control, press and hold the Program button. 4. While pressing the Program button, press the 1-4 button three times consecutively. 5. Release the Program button.
1. Press the Group Number button for the lighting group you want to turn on or off. If you want to turn on or off ALL lighting groups, press the 1-4 button. 2. Press the On/Off button. If the lights were previously off, they will turn on. If the lights were previously on, they will turn off. Note: The previously selected group (or all groups, if selected) remains the active group on the remote control. To take action on that same group again, you do not have to press the group button again.
Note: The previously selected group (or all groups, if selected) remains the active group on the remote control. To take action on that same group again, you do not have to press the group button again. Replacing Batteries Your remote control uses two AA 1.5V alkaline batteries (included). To replace the batteries, remove the battery cover from the back of the remote control and remove the old batteries. Insert the new batteries as indicated in the battery compartment.
3. Press and hold the Program button. 4. While still pressing the Program button, reinsert the batteries into the remote control. 5. Release the Program button. The remote control is returned to its default factory settings. To use it again, you must follow the original installation instructions.
Troubleshooting If you are having problems with your lighting system, refer to the following sections for possible troubleshooting solutions. Light Bulb Not Responding During Installation When you add a new light bulb to the network (or if you add a previously existing light bulb that you removed from the network), the light bulb should brighten and dim during the installation process to indicate that it is searching for a network.
from the network (this light bulb will brighten and dim). If this happens, follow the procedure in the Light Bulb Tasks chapter to add a new light bulb to the network. Resetting Your Light Bulbs If you are unable to fix issues that arise with your lighting system, you can reset your light bulbs as a last resort. To do so, follow the procedure in the Light Bulb Tasks chapter to remove light bulbs from the network, followed by the procedure to add a new light bulb to the network.
control’s signal. You should hold the remote control at least 1 foot (.3 meters) away from any of your network light bulbs. • Reset the remote control. If the remote control is not functioning correctly but the batteries are new, then you may have to reset the remote control to its default factory settings. The factory reset process is as discussed in the Remote Control Operation chapter. • Replace a lost or broken remote control.
function, which is a limitation with the UPNP technology. In the event of this problem, it is recommended that you use a different router altogether to discover the Gateway on the local network.
Safety Information Batteries Use only AA 1.5V alkaline batteries. WARNING: Batteries can explode, or leak and can cause injury or fire. To reduce this risk: • Carefully follow all instructions and warnings on the battery label and package. • Always insert batteries correctly with regard to polarity (+ and -) marked on the battery and the equipment. • Do not short battery terminals. • Do not mix old and new batteries. Replace all of them at the same time with new batteries of the same brand and type.
• Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools, etc. The US Department of Transportation Hazardous Material Regulations (HMR) prohibits transporting batteries in commerce or on airplanes (i.e. packed in suitcases and carryon luggage) UNLESS they are properly protected from short circuits.
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label indicates that you must not discard this electrical / electronic product in domestic household waste. WEEE Product Category - With reference to the equipment types in the WEEE Directive Annex 1, this product is classed as category 3 “IT and Telecommunications Equipment.
Product Specifications Light Bulbs CFL Radio Frequency Features Light Intensity Color Temperature Color Range Index 2.4GHz On, Off, Dim 1100lm Warm White (2700K) 82 Wattage 23W Equivalent Wattage (Incandescent Replacement) 100W Voltage 120V/60Hz Remote Control Radio Frequency Operating Temperature 2.
Gateway Model GL30000, GL30002-A GL32200, GL32202-A 2.4GHz Radio Frequency ● ● Z-Wave Radio Frequency N/A 908.42MHz ● ● RJ45 Port for LAN/WAN network connection Operating Temperature 0°C ~ +40°C 0°C ~ +40°C Storage Temperature -20°C ~ +60°C -20°C ~ +60°C Operating Humidity 20% ~ 85% RH 20% ~ 85% RH Storage Humidity 5% ~ 95% RH 5% ~ 95% RH 120 x 60 x 33 mm 120 x 60 x 33 mm 101 g 101 g Size Weight Power Adapter Plug Type A Type A Input 100-240V ~50/60Hz, 0.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Declaration(s) of Conformity These CE Marked GreenWave Reality products incorporating Radio and Telecoms Terminal Equipment functionality are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original CE Declaration of Conformity is on file and available upon request for all CE Marked GreenWave Reality products. Please visit www.greenwavereality.com to obtain a copy of the Declaration.
