User's Manual

48
control together. You could create a fixture that includes both of them so that you can control them together as if
they were part of one light fixture. Then you could perform tasks on that fixture, such as turning it on or off,
dimming or brightening the lights, or creating a Smart Control to control it.
To create a fixture:
1. Tap the Settings menu at the bottom of the page
2. When the Settings page opens, tap Your Lights & Fixtures.
3. When the Lights & Fixtures page opens, tap Create New Fixture.
4. On the Fixture page:
a. Tap Choose Name to type a name for your new fixture.
b. Tap Choose Room to select or create the room where your fixture will be located.
c. Tap Choose Icon to select an icon to associate with the fixture. You can select from any of the
following types of icons:
• Default Icons include standard light bulb icons that come with the application.
• Saved Images allows you to select a picture that exists on your smart device.
• Create New allows you to use your smart device’s camera to take a picture (usually
of the light or fixture) to use as the icon.
d. Tap Select Additional Bulb to add each of the light bulbs you want to include in the fixture.
Tap Back when you finish adding all bulbs to this fixture.
e. When you finish setting the fixture properties, tap Save.