User's Manual

22
3. Power the Gateway by plugging it into an electrical outlet using the included power adapter. The
Gateway illuminates while it is attempting to connect to the Internet.
4. Verify that the Gateway is connected. The Gateway is connected when both the network indicator
and the Internet indicator turn off, the sync button is green, and the power indicator is white
Mounting the Gateway on a Wall
You can mount the Gateway to a wall with screws, using the mounting slots located on the back of the Gateway.
As shown in the illustration, you should use two self-tapping screws for mounting with the following dimensions
(also refer to the corresponding illustration callouts):
1. 5.3 mm
2. 15 mm
3. M3
Screw the self-tapping screws into the wall, level with a
distance of 60 mm between the center point of the two
screw heads. Hang the Gateway by sliding the holes