User's Manual

21
b. While pressing the Program button, press and release the On/Off button (keep the Program
button pressed).
c. While still pressing the Program button, press and release the 1-4 button.
d. While still pressing the Program button, press and release the On/Off button again.
e. Release the Program button. All group number indicator lights and the primary indicator light
flash slowly for 30 seconds.
2. Install the Gateway
Since the Gateway connects to your home network router, make sure you have space near your router to place
the Gateway. We recommend that you to place the Gateway at least a meter from the network router to avoid
any interference with the Wi-Fi signal. In the event of frequent disconnections of the light bulbs with the Gateway,
the first option would be to procure a lengthier Ethernet cable and place the gateway as far as possible from the
wireless router. Of course, the Gateway needs to be placed in a centralized location depending on the number of
light bulbs you have installed in order to achieve a good performance in wireless connectivity with the light bulbs.
You can also mount the Gateway to your wall (discussed in the next section). Use the following steps to install
the gateway:
1. Make sure your router is already connected to your
home network.
2. Connect the Gateway to any available port in your
router using the included Ethernet cable.