User's Manual

6 of 9 rev 1.2
Timers
Each Colorspree bulb comes with two internal timers.
Once the timers are set, the device does not need to be
connected to the bulb.
The timer will turn on to whatever state the bulb is in
when the timer is set.
If the bulb stops receiving POWER, the timer will need to
be sent once again to the bulb.
Touch a Time to change the settings for the bulb.
Settings
Quick Scan
Scan only for KNOWN bulbs that you have already
installed.
This feature must be turned off if you are installing
NEW bulbs.
Save Color
SAVE the current color to connected bulbs.
The saved color is restored when a wall switch is
used - i.e. White.
Manage KNOWN and IGNORED bulbs.
Change the APP pin if you wish to control bulbs with a
different PIN.