User's Manual
P0068X04G8 P0068X04G8
FEATURE
TD-68 is a flat-designed car audio. Features of TD-68 include FM/AM tuner, MP3 player, AUX IN, Bluetooth
functions, Clock setting & Equalizer setting.
Main feature: Digital FM/AM Radio Tuner, USB-MP3 Player, Clock display, AUX IN, Bluetooth
function
Tuner: Support FM tuning (87.5 ~ 108MHz), AM tuning (522~1629KHz)
MP3 player: Support MP3 format in USB drives
AUX IN: Support sound source from external devices through AUX cable
Bluetooth: A2DP, AVRCP, HFP
Clock display: Support 24-hour format and clock memory (when only ACC supply is disconnected)
Maintenance:
Please read this manual before using the product.
Please keep this manual for reference.
Speaker impedance must be equal or over 4Ω.
Keep the product away from water / dust / magnetic environments.
If the radio is out of order, please shut down the power and inform our service department.
The product is out of guarantee in case of self-caused damages.
PANEL
Functions
1. POWER / MODE
POWER : Switch on and off when holding for more than 2 seconds.
MODE: press to switch between modes: Radio MP3 AUX IN BT PLAY.
2. MUTE / LOUDNESS
MUTE : press to switch between <Mute / Restore>.
LOUDNESS : Hold for more than 2 seconds. Only activated under AM/FM mode.
3. APS (Auto Preset Stores) / BAND
BAND : Selecting waveband FM1/ FM2/FM3/AM1/ AM2.
APS : Hold for more than 2 seconds to auto scan and prestore stations.
4. PRESET FUNCTION KEYS
RADIO : Switch to play prestored stations, hold for more than 2 seconds to
store the current frequency to prestored station.
MP3 PLAYER :
< 1/ ▍▍▶>
Pause / Player
< 4 / RDM >
Random / Player
< 2 / SCAN >
Scan / Player
< 5 / DISP >
Track number / Play time
< 3 / RPT >
Repeat / Player
< 6 / PHONE >
Answer calls / Player
5. LCD DISPLAY
Current frequency and activated functions are shown on the LCD panel.
6. VOL＋ / VOL－:
Adjust the volume.
7. SEL ( Sound Effects) / CLOCK / HANG UP
SEL ( Sound Effects) : Adjust the volume/ balance/ treble/ bass.
CLOCK : Adjust the clock to current time.
HANG UP: Hang up the phone.
8. SEEK / MUSIC TRACK
Switch up/ down to seek radio frequencies, MP3 track or BT PLAY track.
9. USB PORT
Insert USB to auto play MP3 music.Some devices may support 5V 2A output.
10. AUX PORT
Click POWER to switch to AUX IN Mode when an AUX cable is inserted.
Insert 3.5mm AUX cable to play external sound sources of other devices like Smartphones or
MP3 Players.
11. MIC PORT
Connect Radio with your phone device via Bluetooth to call.
OPERATION
1. RADIO
BAND
Press <APS> to change FM1/ FM2/ FM3/AM1/ AM2.
AUTO SEEK
Press “SEEK/TRACK〈 or 〉” to automatically seek station until a station is detected. Then the
station will be locked and played.
MANUAL SEEK
Press and hold “SEEK/TRACK〈 or 〉” for more than 2 seconds to manually seek up/down, after
releasing the button, you can press “SEEK/TRACK〈 or 〉” to adjust the frequency. the final
selected station will be played after 2 seconds without any operations.
AUTO PRESET STORES
Press and hold <APS> for more than 2 seconds to auto scan all stations and store them to preset
function keys.
PLAY PRESET STATIONS
Press preset function keys 1/2/3/4/5/6 to play preset stations.
STORE CURRENT AUDITION STATION
Preset and hold button of 1/2/3/4/5/6 for few seconds to store current audition station.
2. MP3 SETTINGS
MP3 MODE
Press < POWER / MODE > to exchange between radio, MP3,AUX IN and BT PLAY.
USB PLAYER
Without USB device LCD DISPLAY will show "----".
With a USB device but no MP3 format inside the LCD DISPLAY shows"NO FILE".
After loading, LCD DISPLAY shows the total amount of songs and starts playing.
TRACK NUMBER / PLAY TIME
Track number and Play time can be interchanged each other in LCD display by pressing
< 5 / DISP >.
1
POWER / MODE
2
MUTE / LOUDNESS
3
APS ( Auto Preset Store) / BAND
4
PRESET FUNCTION KEYS
5
LCD DISPLAY
6
VOL＋/ VOL－
7
SEL ( Sound Effects) / CLOCK
8
SEEK / MUSIC TRACK
9
USB PORT
10
AUX PORT
11
MIC PORT