Users Manual
Table Of Contents
- LTE CPE Quick Start
- Scenario 1：Accessing the Internet using an LTE network
- Step 1：Installing the SIM card
- Step 2：Installing the battery
- Step 3: Charging the Battery
- Use the charger to charge the device
- Note:
- Step 4：Connecting cables
- 3．Setting up a Wi-Fi connection
- Step 1：Enable Wi-Fi on the device
- Step 2: Recording the SSID and Wi-Fi key
- Step 3: Setting up a Wi-Fi connection on your client
- Electronic device
- Interference with medical equipment
- Areas with flammables and explosives
- Operating environment
- Child's safety
- Accessories
- Power adapter safety
- Cleaning and maintenance
- Environmental protection
- Warning:
⑨power button
Press the button to power the device
on or off;
⑩Power port
Connect to compatible power
adapter.
⑪WPS/Reset
button
⑫
Battery port
Press for 2 seconds to active WPS
connection when Wi-Fi is turned on.
!! Restoring the default settings of
the device will erase all previous
settings.
When the device is powered
on ,press the reset button and hold
for about 8 seconds to restore the
device to its factory settings. After
the factory defaults are restored, the
device will restart automatically.
Connect to compatible battery
⑬SIM card slot
Install a standard SIM card to access
the internet via an LTE data
connection.
⑭USB port
Connect to compatible USB adapter.
（
Only for upgrade software
）。
2．Installation
Scenario 1：Accessing the Internet using an LTE network
Step 1：Installing the SIM card