Users Manual
Table Of Contents
- LTE CPE Quick Start
- Scenario 1：Accessing the Internet using an LTE network
- Step 1：Installing the SIM card
- Step 2：Installing the battery
- Step 3: Charging the Battery
- Use the charger to charge the device
- Note:
- Step 4：Connecting cables
- 3．Setting up a Wi-Fi connection
- Step 1：Enable Wi-Fi on the device
- Step 2: Recording the SSID and Wi-Fi key
- Step 3: Setting up a Wi-Fi connection on your client
- Electronic device
- Interference with medical equipment
- Areas with flammables and explosives
- Operating environment
- Child's safety
- Accessories
- Power adapter safety
- Cleaning and maintenance
- Environmental protection
- Warning:
②
network mode
indicator
③
Wi-Fi indicator
④LAN indicator
⑤
Signal strength
indicator
⑥battery back
cover
⑦⑧LAN port
Steady blue：connected to a 4G
network.
Blue flicker：4G data transfer.
Steady red：
---The SIM card is not recognized, the
PIN has not been entered, or the PIN
verification failed.
---Failed to connect to a mobile
network or an Ethernet network.
Red flicker：Looking for network.
Steady on：Wi-Fi turned on.
Off: Wi-Fi turned off.
Steady on：At least one of the LAN
ports is connected to a device.
Blinking：data is being transmitted
through a LAN port
Off：No device is connected to a LAN
port.
On：signal reception available(more
bars mean better reception).
Off：no reception.
Connect to computer, switch, or
other LAN device.