Users Manual
Table Of Contents
- LTE CPE Quick Start
- Scenario 1：Accessing the Internet using an LTE network
- Step 1：Installing the SIM card
- Step 2：Installing the battery
- Step 3: Charging the Battery
- Use the charger to charge the device
- Note:
- Step 4：Connecting cables
- 3．Setting up a Wi-Fi connection
- Step 1：Enable Wi-Fi on the device
- Step 2: Recording the SSID and Wi-Fi key
- Step 3: Setting up a Wi-Fi connection on your client
- Electronic device
- Interference with medical equipment
- Areas with flammables and explosives
- Operating environment
- Child's safety
- Accessories
- Power adapter safety
- Cleaning and maintenance
- Environmental protection
- Warning:
!! For instructions about how to enable a WPS connection on the
client, see the client's user guide.
4．Configuring your device
1. After a client is connected to the device through Wi-Fi
or LAN port, launch a browser on the client and visit
http://192.168.1.1.
2. Enter the user name and password to log in to the web
management page. The default user name and password
are printed on the device's bottom label.
3. Follow the quick setup wizard to check or set network
connection parameters step by step. For details, see the
help information on the web management page.
To protect your account, change the password after your
first login. For details, see the help information on the web
management page.
If you modify the SSID and Wi-Fi key, you must set up the
Wi-Fi connection on the client again.
Once you are done, try opening a web page on the client to verify
whether you have Internet access.
5．For more help
If you are experiencing any issues with the device:
Restart the device.
See the help information on the web management page.
Restore the device to its factory settings.
Contact your service provider.