User's Manual

8
Tally Setting
Enter the menu and choose “Tally Setting”. Then press “Confirm” button to enter the setting. Choose
to turn on or turn off the function by pressing “Left” and “Right” button. Press “Exit” button to return
to the previous menu after setting.
Turn on the Tally function, the 2 indicators at the top of the belt-pack display red or green colors
continuously according to the switcher signal. Now the 2 indicators are unable to flicker to display
transferring or receiving signals.
MIC Return
Enter the menu and choose “MIC Return”. Then press “Confirm” button to enter the setting. Choose
suitable level by pressing “Left” and “Right” button. There are 10 levels from 0 to 100%. Choose the
suitable level as required. Press “Exit” button to return to the previous menu after setting.
Turn on the MIC Return function, you could hear your own voice returned by the microphone. Your
return voice will be higher with a higher level.
It is usually advised to turn off the “MIC Return function”, otherwise it may influence acoustic echo
cancellation function.