User's Manual

2
Chapter 1 Function Display
Switch / Volume
Screw the switch clockwise to turn on the device and enlarge the volume,
Antenna
Receive and transfer signal.。
Headphone
Headphone Interface
Chapter 2 Description
Indicator
Red light flicker indicates transfer signal and green light flicker indicates receive signal. If the tally
function is enabled by tally setting, the indicator will display tally signal in priority, namely continuously
red(PGM) or green(PVW).
MUTE
Press the key to transfer audio signal once red light flicker. Now you could speak by headphone
microphone. Press again to close the function.
Screen
Display information
Setting
Menu / Confirm Left Right Exit
TALLY
Transfer tally signal to tally screen by a connection cable （Not headphone interface）
Charging Indicator
Red light indicates charging, green light indicates fully charged.