User's Manual

Application Note [Page 16]
EMW3166_Guide For User Design
Set as followed:
Figure 11 Hyper Terminal Setting Connection
3.3.2 Module testing
Click “connect” in “Hyper Terminal” to connect the PC to EMWE-3166-A V1.0 development
board.
Place the module on the fixture.
Press down the handle.
3.3.3 Testing result
It lists the testing result from serial on “Hyper Terminal”. The message includes: bootloader
version, library version, application version, driver version, MAC address, APs’ name and signal
strength.
Set ports
Bit
Data bits
parity
stop
data flow
control
None
None
Reset
Ensure Cancel
Apply
Property