User's Manual

Application Note [Page 15]
EMW3166_Guide For User Design
3. Firmware programming and warehousing detection method
Receiving Inspection Device List 3.1
Auxiliary Equipment list shows below:
Table 1 Warehousing Detection Auxiliary Equipment List
Auxiliary Equipment
Quantity
PC
1（pcs）
Fixture
1（pcs）
EMWE-3166-A V1.0 Development Board
1（pcs）
Note: It is not for sale in above the table Auxiliary Equipment.
Application software and firmware:
FT230XS (drivers on PC), download link:
http://www.ftdichip.com/Drivers/VCP.htm
Programming firmware should be confirmed by both MXCHIP FAE and guests. Its size is
512kbytes. The set of the three toggle switches on EMWE-3166-A V1.0 development board:
Figure 10 Development Board Switch Settings
Collection 3.2
Connect the fixture to the EMWE-3166-A V1.0 development board by the pin header. Connect the EMWE-3166-A
V1.0 development board to PC by USB Mini cable.
Red led lights if connected.
Warehousing detection 3.3
3.3.1 Software setting
Software：Hyper Terminal
Find the COM number where EMW3166 connect with PC in “device manager”.