Data Sheet

Datasheet [Page 5]
EMW3080V2
EMW3080V2 Label Information
There are two types of label as following.
Figure 2 EMW3080V2 Label Information
CMIIT ID:XXXXXXXXXX: SRRC approval number
FCC ID:P53-EMW3080V2: FCC certification information
MXCHIP: Company Logo
EMW3080V2-P/-E: Module type, -P is PCB antenna; -E is IPEX antenna
B0F893106220: MAC address (Each module has a unique MAC address)
X1916：Production batch, X is factory code. 19 is production year. 16 is week number.
0000.0000.A213: Production firmware SN series number
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Pin Arrangement
EMW3080V2 has SOH(snap off hole) package and DIP package, DIP package (as shown in figure 2) could
effectively reduce the quality risk of second patch；SOH package (as shown in figure 3) is easy to debug, provide
multi-choice for customers. Solder mask openness has the same size with land. The width of steel mesh is suggested
to be 0.12mm to 0.14mm in SMT.
Figure 3 DIP Package Size