Data Sheet
Table Of Contents
- Abstract
- Version Record
- 1. Product Introduction
- 2. Electrical Parameters
- 3. RF Parameters
- 4. Antenna Information
- 5. Production Instruction
- 6. Reference Circuit
- 7. FCC and IC Information
- 8. Module MOQ and packaging information
- 9. Sales Information and Technical Support
Datasheet [Page 14]
EMW3072
3.3.2 IEEE802.11g. Mode RX Performance
RX Minimum Receiving Sensitivity
Minimum
Typical.
Maximum
Unit
Remark
6Mbps (FER≦10%)
-
-92.5
-92.5
dBm
54Mbps (FER≦10%)
-
-76
-75.5
dBm
3.3.3 IEEE802.11n HT20 Mode RX Performance
RX Minimum Receiving Sensitivity
Minimum
Typical.
Maximum
Unit
Remark
MCS0 (FER≦10%)
-
-92.5
-92
dBm
MCS7 (FER≦10%)
-
-73
-73
dBm
3.3.4 IEEE802.11n HT40 Mode RX Performance
RX Minimum Receiving Sensitivity
Minimum
Typical.
Maximum
Unit
Remark
MCS0 (FER≦10%)
-
-90
-90
dBm
MCS7 (FER≦10%)
-
-70
-70
dBm
Note:
Tx test data above are typically recorded at room temperature for about 20 seconds.
11b power is measured in factory mode (through-the-wall mode). User's practical application and authentication test will be 2 dB lower
than that in factory mode, i.e. the actual maximum power limit of 11b is 16 dBm. Ensure that the PSD test items of the certification test
pass.
3.3.5 OTA Performance
TBD