Data Sheet
Table Of Contents
- Abstract
- 1. Introduction
- 2. Characteristics
- 3. Pin Definition
- 4. System memory Space
- 5. ATE（RF Test Mode）
- 5.1. Wi-Fi ATE Command
- 5.1.1. Start MP mode
- 5.1.2. Stop MP mode
- 5.1.3. Set Tx rate
- 5.1.4. Set operational channel
- 5.1.5. Set operational bandwidth
- 5.1.6. Set Tx power
- 5.1.7. Set antenna for Tx
- 5.1.8. Set antenna for Rx
- 5.1.9. Start air Rx mode
- 5.1.10. Start continuous Tx mode
- 5.1.11. Query air Rx statistics
- 5.1.12. Reset air Tx/Rx statistics
- 5.2. Bluetooth ATE Command（TBD）
- 5.3. Example Command
- 5.1. Wi-Fi ATE Command
- 6. Flash Programming
- 7. Electrical Parameters
- 8. RF Parameter
- 9. Antenna Information
- 10. Dimensions and Production Guidance
- 11. Production Guidelines
- 12. FCC and IC Information
- 12.1. FCC Warning
- 12.2. IC warning
- 12.3. Trace antenna designs
- 12.4. RF exposure considerations
- 12.5. Antennas
- 12.6. Label and compliance information
- 12.7. Information on test modes and additional testing requirements5
- 12.8. Additional testing, Part 15 Subpart B disclaimer
- 12.9. The module is limited to OEM installation ONLY.
- 12.10. The OEM integrator is responsible for ensuring that the end-user has no manual instructions to remove or install module.
- 12.11. The module is limited to installation in mobile or fixed applications
- 13. Packaging and Label Information
- 14. Sales and Technical Support Information
EMC3380 Series Wireless Module Data Manual
Copyright of Shanghai MXCHIP Information Technology Co., Ltd.
12
Touch button
▪ Support 4 touch sensor channels
▪ Automatic hardware channel scanning, programmable scanning cycle, quantity and cycle
▪ Differential or absolute threshold judgment mode (ETC)
▪ Automatic environmental capacitance tracking and calibration (ETC)
▪ Hardware automatic baseline initialization
▪ Automatic baseline and threshold updates for noisy environments
▪ Programmable button debounce function
▪ Each interrupt source can enable interrupts
▪ 4 * 12 bits FIFO
▪ Ultra-low power consumption
Analog Processing
ADC and voltage comparator
▪ Successive approximation register ADC converter with 12-bit precision
▪ Number of channels
▪ 3 external 3.3V channels
▪ 3 internal channels
▪ Configurable inputs: single-ended mode and differential mode
▪ Support DMA transfer
▪ Sampling trigger source: software, timer
▪ A low-power voltage comparator for measuring battery power
▪ Can trigger wake-up circuit