Data Sheet

EMC3080 Series Wireless Module Data Manual

Introduction

The EMC308x series modules are mainly used for IoT data communication. Data collection and control

are realized through a rich peripheral interface, and data can be transmitted to the Internet of Things

cloud service platform through a Wi-Fi network connection to realize the Internet of Everything. This

series of modules is used in a wide range of IoT applications through a variety of different form factors,

interface types, antenna interfaces and temperature range.

The module includes a super-integrated Wi-Fi microcontroller MX1300CF that integrates a Cortex-M33

core up to 125MHz, 256K bytes of SRAM, 2M bytes of Flash memory, and IEEE 802.11 b/g/ n Standard

2.4 GHz RF. Streamlined peripheral circuitry makes the overall module size and interface design more

flexible and easier to control costs. The high-performance processing core and security module greatly

improve the speed of networking interaction and reduce the overall power consumption while ensuring

data security.

Shanghai MXCHIP provides MXOS and AliOS software platforms to support the development of

EMC3080 series modules, providing an efficient development environment, access protocol stacks for

various IoT cloud services, rich sample programs and various typical applications.

The following figure shows the hardware block diagram of the EMC3080 module, which mainly includes:

⚫ Cortex-M33 core clocked up to 100MHz

⚫ 256K bytes of SRAM

⚫ 2M bytes XIP Flash

⚫ 2.4GHz Wi-Fi controller conforming to IEEE 802.11 b / g / n standard

⚫ Bluetooth Low Energy Controller that complies with BT4.2 BQB specifications

Figure 1 EMC3080 Hardware Block Diagram