User's Manual

1. Open the back cover of main microphone. Determine the size of the guide on each side of the
chip and then insert the receiving pack.
2. Open the cover of the battery and chip compartment, insert two AA batteries and press the
power button. It is working when the red LED light on.
3. The channel of Main Mic and Sub-Mic should be default channel “5” please follow the
operate as below as follows
a. Use Sub-microphone press “
” + “1” “2” “3” “4” “5” “6” “7” “8” “9”to change the
cannel of main Mic and Sub-Mic simultaneity If needed.
b. If the Sub-microphone is not working when you change the channel, that you should use
main microphone and press “
” Æ “6” Setup menu Æ “Sub Mic Search” to search
the channel of Sub-Microphone.
c. Please keep the power “on” when using the Sub Mic Search function.
4.
(up/down)
Scroll up/down from the current song to adjust Key,tempo,Microphone,volume,music
echo,etc.
5.
PROG
Allows you to reserve songs.if you select the next song using this button.it will automaticly
play when the current song ends.
6.
Power
The power button ON&OFF
7.
Press this botton to play the select song
8.
Press this button to operate the Random play ,Record,Setup,Repeat Functon.
9.
Press the this button to operate the select song function.
10.
Press “iFUN“button On /Off iFUN function.
iFUN is a strong scoring system.
11.
Press number button to adjust key, tempo, microphone volume, music, echo, etc.
* when the LED light is flashing ,the batteries need to be replaced
Notice for user