User's Manual
P.5
● PC software & USB interface
adapter is for connecting to
a computer, for updating &
setting up.
● There is system reset switch
on the top of the airframe,
it is easy to rest the ight
controller without unplug &
plug the power battery.
● There are plug pins under
& above the Quad-copter,
which are for connecting to
the Camera gimbal controls,
Video in/out, external servos,
OSD unit, Video remote
control….etc, no modication
needed, just plug & play.
● There is a at platform on
the rear and bottom of the
airframe, the optional devices
could be attached to the
Quad-copter easily. ( Optional
modules: FPV + gimbal
module, ofoad hook, spot
light… etc)