User's Manual

P.15
Motor disarming :
● When the Quad-copter nish landing, move the throttle stick in low position. Make
sure the motors are spinning in slow speed; or the Quad-copter will rotate quickly.
● Pull the joysticks as the picture above and stay 2 seconds -the blue LED on the
right corner of the Quad-copter will ash once.
● Pull the joysticks till the motor is fully stopped. The motor disarming is completed.
GPS Hold :
● In GPS located situation, GPS-Hold (CH.5 at top position) ight mode will keep
the Quad-copter’s stabilization and locked at a xed altitude, coordinate and
orientation. The Quad-copter won’t drift in the air due to the GPS lock to locate the
coordinate in this ight mode.
● If GPS is not well located, the motor will not be armed.
● If the GPS failed to locate in the air but the pilot activates GPS mode, the Quad-
copter will response as altitude hold mode.
Altitude Hold :
● ALT-Hold (CH.5 at middle position) ight mode will keep the Quad-copter’s
stabilization and locked at a xed altitude & orientation, but the Quad-copter may
drift in the air due to no GPS help to locate he The Quad-copter coordinate..
● In a no GPS condition (as indoor), it will be the only available ight mode; the
GPS-Hold and RTL will be unvalid.
MOTOR DISARM
MODEL 1 MODEL 2